From dc5a35a5072b273ce2be5b2110bacf298150a725 Mon Sep 17 00:00:00 2001 From: fanquake Date: Wed, 18 Nov 2020 20:39:19 +0800 Subject: doc: clean out release notes post branch-off --- doc/release-notes.md | 386 +-------------------------------------------------- 1 file changed, 4 insertions(+), 382 deletions(-) (limited to 'doc') diff --git a/doc/release-notes.md b/doc/release-notes.md index 0331328ff5..57067138b0 100644 --- a/doc/release-notes.md +++ b/doc/release-notes.md @@ -45,11 +45,6 @@ wallet versions of Bitcoin Core are generally supported. Compatibility ============== -During this release cycle, work has been done to ensure that the codebase is fully -compatible with C++17. The intention is to begin using C++17 features starting -with the 0.22.0 release. This means that a compiler that supports C++17 will be -required to compile 0.22.0. - Bitcoin Core is supported and extensively tested on operating systems using the Linux kernel, macOS 10.12+, and Windows 7 and newer. Bitcoin Core should also work on most other Unix-like systems but is not as @@ -60,422 +55,49 @@ From Bitcoin Core 0.20.0 onwards, macOS versions earlier than 10.12 are no longer supported. Additionally, Bitcoin Core does not yet change appearance when macOS "dark mode" is activated. -The node's known peers are persisted to disk in a file called `peers.dat`. The -format of this file has been changed in a backwards-incompatible way in order to -accommodate the storage of Tor v3 and other BIP155 addresses. This means that if -the file is modified by 0.21.0 or newer then older versions will not be able to -read it. Those old versions, in the event of a downgrade, will log an error -message "Incorrect keysize in addrman deserialization" and will continue normal -operation as if the file was missing, creating a new empty one. (#19954) - Notable changes =============== P2P and network changes ----------------------- -- The mempool now tracks whether transactions submitted via the wallet or RPCs - have been successfully broadcast. Every 10-15 minutes, the node will try to - announce unbroadcast transactions until a peer requests it via a `getdata` - message or the transaction is removed from the mempool for other reasons. - The node will not track the broadcast status of transactions submitted to the - node using P2P relay. This version reduces the initial broadcast guarantees - for wallet transactions submitted via P2P to a node running the wallet. (#18038) - -- The size of the set of transactions that peers have announced and we consider - for requests has been reduced from 100000 to 5000 (per peer), and further - announcements will be ignored when that limit is reached. If you need to dump - (very) large batches of transactions, exceptions can be made for trusted - peers using the "relay" network permission. For localhost for example it can - be enabled using the command line option `-whitelist=relay@127.0.0.1`. - (#19988) - -- The Tor onion service that is automatically created by setting the - `-listenonion` configuration parameter will now be created as a Tor v3 service - instead of Tor v2. The private key that was used for Tor v2 (if any) will be - left untouched in the `onion_private_key` file in the data directory (see - `-datadir`) and can be removed if not needed. Bitcoin Core will no longer - attempt to read it. The private key for the Tor v3 service will be saved in a - file named `onion_v3_private_key`. To use the deprecated Tor v2 service (not - recommended), then `onion_private_key` can be copied over - `onion_v3_private_key`, e.g. - `cp -f onion_private_key onion_v3_private_key`. (#19954) - Updated RPCs ------------ -- The `getpeerinfo` RPC now has additional `last_block` and `last_transaction` - fields that return the UNIX epoch time of the last block and the last valid - transaction received from each peer. (#19731) - -- `getnetworkinfo` now returns two new fields, `connections_in` and - `connections_out`, that provide the number of inbound and outbound peer - connections. These new fields are in addition to the existing `connections` - field, which returns the total number of peer connections. (#19405) - -- Exposed transaction version numbers are now treated as unsigned 32-bit - integers instead of signed 32-bit integers. This matches their treatment in - consensus logic. Versions greater than 2 continue to be non-standard - (matching previous behavior of smaller than 1 or greater than 2 being - non-standard). Note that this includes the joinpsbt command, which combines - partially-signed transactions by selecting the highest version number. - (#16525) - -- `getmempoolinfo` now returns an additional `unbroadcastcount` field. The - mempool tracks locally submitted transactions until their initial broadcast - is acknowledged by a peer. This field returns the count of transactions - waiting for acknowledgement. - -- Mempool RPCs such as `getmempoolentry` and `getrawmempool` with - `verbose=true` now return an additional `unbroadcast` field. This indicates - whether initial broadcast of the transaction has been acknowledged by a - peer. `getmempoolancestors` and `getmempooldescendants` are also updated. - -- The `bumpfee`, `fundrawtransaction`, `sendmany`, `sendtoaddress`, and `walletcreatefundedpsbt` -RPC commands have been updated to include two new fee estimation methods "BTC/kB" and "sat/B". -The target is the fee expressed explicitly in the given form. Note that use of this feature -will trigger BIP 125 (replace-by-fee) opt-in. (#11413) - -- In addition, the `estimate_mode` parameter is now case insensitive for all of - the above RPC commands. (#11413) - -- The `bumpfee` command now uses `conf_target` rather than `confTarget` in the - options. (#11413) - -- The `getpeerinfo` RPC no longer returns the `banscore` field unless the configuration - option `-deprecatedrpc=banscore` is used. The `banscore` field will be fully - removed in the next major release. (#19469) - -- The `testmempoolaccept` RPC returns `vsize` and a `fees` object with the `base` fee - if the transaction would pass validation. (#19940) - -- The `getpeerinfo` RPC now returns a `connection_type` field. This indicates - the type of connection established with the peer. It will return one of six - options. For more information, see the `getpeerinfo` help documentation. - (#19725) - -- The `getpeerinfo` RPC no longer returns the `addnode` field by default. This - field will be fully removed in the next major release. It can be accessed - with the configuration option `-deprecatedrpc=getpeerinfo_addnode`. However, - it is recommended to instead use the `connection_type` field (it will return - `manual` when addnode is true). (#19725) - -- The `walletcreatefundedpsbt` RPC call will now fail with - `Insufficient funds` when inputs are manually selected but are not enough to cover - the outputs and fee. Additional inputs can automatically be added through the - new `add_inputs` option. (#16377) - -- The `fundrawtransaction` RPC now supports `add_inputs` option that when `false` - prevents adding more inputs if necessary and consequently the RPC fails. - Changes to Wallet or GUI related RPCs can be found in the GUI or Wallet section below. New RPCs -------- -- The `getindexinfo` RPC returns the actively running indices of the node, - including their current sync status and height. It also accepts an `index_name` - to specify returning only the status of that index. (#19550) - Build System ------------ +New settings +------------ + Updated settings ---------------- -- The same ZeroMQ notification (e.g. `-zmqpubhashtx=address`) can now be - specified multiple times to publish the same notification to different ZeroMQ - sockets. (#18309) - -- The `-banscore` configuration option, which modified the default threshold for - disconnecting and discouraging misbehaving peers, has been removed as part of - changes in 0.20.1 and in this release to the handling of misbehaving peers. - Refer to "Changes regarding misbehaving peers" in the 0.20.1 release notes for - details. (#19464) - -- The `-debug=db` logging category, which was deprecated in 0.20 and replaced by - `-debug=walletdb` to distinguish it from `coindb`, has been removed. (#19202) - -- A `download` permission has been extracted from the `noban` permission. For - compatibility, `noban` implies the `download` permission, but this may change - in future releases. Refer to the help of the affected settings `-whitebind` - and `-whitelist` for more details. (#19191) - -- Netmasks that contain 1-bits after 0-bits (the 1-bits are not contiguous on - the left side, e.g. 255.0.255.255) are no longer accepted. They are invalid - according to RFC 4632. Netmasks are used in the `-rpcallowip` and `-whitelist` - configuration options and in the `setban` RPC. (#19628) - -Changes to Wallet or GUI related settings can be found in the GUI or Wallet section below. +Changes to Wallet or GUI related settings can be found in the GUI or Wallet section below. Tools and Utilities ------------------- -- The `connections` field of `bitcoin-cli -getinfo` is expanded to return a JSON - object with `in`, `out` and `total` numbers of peer connections. It previously - returned a single integer value for the total number of peer connections. (#19405) - -- A new `bitcoin-cli -generate` command, equivalent to RPC `generatenewaddress` - followed by `generatetoaddress`, can generate blocks for command line testing - purposes. This is a client-side version of the - former `generate` RPC. See the help for details. (#19133) - -- The `bitcoin-cli -getinfo` command now displays the wallet name and balance for - each of the loaded wallets when more than one is loaded (e.g. in multiwallet - mode) and a wallet is not specified with `-rpcwallet`. (#18594) - -New settings ------------- - -- The `startupnotify` option is used to specify a command to - execute when Bitcoin Core has finished with its startup - sequence. (#15367) - Wallet ------ -- Backwards compatibility has been dropped for two `getaddressinfo` RPC - deprecations, as notified in the 0.20 release notes. The deprecated `label` - field has been removed as well as the deprecated `labels` behavior of - returning a JSON object containing `name` and `purpose` key-value pairs. Since - 0.20, the `labels` field returns a JSON array of label names. (#19200) - -- To improve wallet privacy, the frequency of wallet rebroadcast attempts is - reduced from approximately once every 15 minutes to once every 12-36 hours. - To maintain a similar level of guarantee for initial broadcast of wallet - transactions, the mempool tracks these transactions as a part of the newly - introduced unbroadcast set. See the "P2P and network changes" section for - more information on the unbroadcast set. (#18038) - -- The `sendtoaddress` and `sendmany` RPCs accept an optional `verbose=True` - argument to also return the fee reason about the sent tx. (#19501) - -- The wallet can create a transaction without change even when the keypool is - empty. Previously it failed. (#17219) - -- The `-salvagewallet` startup option has been removed. A new `salvage` command - has been added to the `bitcoin-wallet` tool which performs the salvage - operations that `-salvagewallet` did. (#18918) - -- A new configuration flag `-maxapsfee` has been added, which sets the max - allowed avoid partial spends (APS) fee. It defaults to 0 (i.e. fee is the - same with and without APS). Setting it to -1 will disable APS, unless - `-avoidpartialspends` is set. (#14582) - -- The wallet will now avoid partial spends (APS) by default, if this does not - result in a difference in fees compared to the non-APS variant. The allowed - fee threshold can be adjusted using the new `-maxapsfee` configuration - option. (#14582) - -- The `createwallet`, `loadwallet`, and `unloadwallet` RPCs now accept - `load_on_startup` options to modify the settings list. Unless these options - are explicitly set to true or false, the list is not modified, so the RPC - methods remain backwards compatible. (#15937) - -- A new `send` RPC with similar syntax to `walletcreatefundedpsbt`, including - support for coin selection and a custom fee rate. The `send` RPC is - experimental and may change in subsequent releases. Using it is encouraged - once it's no longer experimental: `sendmany` and `sendtoaddress` may be - deprecated in a future release. (#16378) - -- `fundrawtransaction` and `walletcreatefundedpsbt` when used with the - `lockUnspents` argument now lock manually selected coins, in addition to - automatically selected coins. Note that locked coins are never used in - automatic coin selection, but can still be manually selected. (#18244) - -- The `-zapwallettxes` startup option has been removed and its functionality - removed from the wallet. This option was originally intended to allow for - the fee bumping of transactions that did not signal RBF. This functionality - has been superseded with the abandon transaction feature. (#19671) - -- The error code when no wallet is loaded, but a wallet RPC is called, has been - changed from `-32601` (method not found) to `-18` (wallet not found). - (#20101) - -### Automatic wallet creation removed - -Bitcoin Core will no longer automatically create new wallets on startup. It will -load existing wallets specified by `-wallet` options on the command line or in -`bitcoin.conf` or `settings.json` files. And by default it will also load a -top-level unnamed ("") wallet. However, if specified wallets don't exist, -Bitcoin Core will now just log warnings instead of creating new wallets with -new keys and addresses like previous releases did. - -New wallets can be created through the GUI (which has a more prominent create -wallet option), through the `bitcoin-cli createwallet` or `bitcoin-wallet -create` commands, or the `createwallet` RPC. (#15454) - -### Experimental Descriptor Wallets - -Please note that Descriptor Wallets are still experimental and not all expected functionality -is available. Additionally there may be some bugs and current functions may change in the future. -Bugs and missing functionality can be reported to the [issue tracker](https://github.com/bitcoin/bitcoin/issues). - -0.21 introduces a new type of wallet - Descriptor Wallets. Descriptor Wallets store -scriptPubKey information using descriptors. This is in contrast to the Legacy Wallet -structure where keys are used to generate scriptPubKeys and addresses. Because of this -shift to being script based instead of key based, many of the confusing things that Legacy -Wallets do are not possible with Descriptor Wallets. Descriptor Wallets use a definition -of "mine" for scripts which is simpler and more intuitive than that used by Legacy Wallets. -Descriptor Wallets also uses different semantics for watch-only things and imports. - -As Descriptor Wallets are a new type of wallet, their introduction does not affect existing wallets. -Users who already have a Bitcoin Core wallet can continue to use it as they did before without -any change in behavior. Newly created Legacy Wallets (which is the default type of wallet) will -behave as they did in previous versions of Bitcoin Core. - -The differences between Descriptor Wallets and Legacy Wallets are largely limited to non user facing -things. They are intended to behave similarly except for the import/export and watchonly functionality -as described below. - -#### Creating Descriptor Wallets - -Descriptor Wallets are not created by default. They must be explicitly created using the -`createwallet` RPC or via the GUI. A `descriptors` option has been added to `createwallet`. -Setting `descriptors` to `true` will create a Descriptor Wallet instead of a Legacy Wallet. - -In the GUI, a checkbox has been added to the Create Wallet Dialog to indicate that a -Descriptor Wallet should be created. - -Without those options being set, a Legacy Wallet will be created instead. Additionally the -Default Wallet created upon first startup of Bitcoin Core will be a Legacy Wallet. - -#### `IsMine` Semantics - -`IsMine` refers to the function used to determine whether a script belongs to the wallet. -This is used to determine whether an output belongs to the wallet. `IsMine` in Legacy Wallets -returns true if the wallet would be able to sign an input that spends an output with that script. -Since keys can be involved in a variety of different scripts, this definition for `IsMine` can -lead to many unexpected scripts being considered part of the wallet. - -With Descriptor Wallets, descriptors explicitly specify the set of scripts that are owned by -the wallet. Since descriptors are deterministic and easily enumerable, users will know exactly -what scripts the wallet will consider to belong to it. Additionally the implementation of `IsMine` -in Descriptor Wallets is far simpler than for Legacy Wallets. Notably, in Legacy Wallets, `IsMine` -allowed for users to take one type of address (e.g. P2PKH), mutate it into another address type -(e.g. P2WPKH), and the wallet would still detect outputs sending to the new address type -even without that address being requested from the wallet. Descriptor Wallets does not -allow for this and will only watch for the addresses that were explicitly requested from the wallet. - -These changes to `IsMine` will make it easier to reason about what scripts the wallet will -actually be watching for in outputs. However for the vast majority of users, this change is -largely transparent and will not have noticeable effect. - -#### Imports and Exports - -In Legacy Wallets, raw scripts and keys could be imported to the wallet. Those imported scripts -and keys are treated separately from the keys generated by the wallet. This complicates the `IsMine` -logic as it has to distinguish between spendable and watchonly. - -Descriptor Wallets handle importing scripts and keys differently. Only complete descriptors can be -imported. These descriptors are then added to the wallet as if it were a descriptor generated by -the wallet itself. This simplifies the `IsMine` logic so that it no longer has to distinguish -between spendable and watchonly. As such, the watchonly model for Descriptor Wallets is also -different and described in more detail in the next section. - -To import into a Descriptor Wallet, a new `importdescriptors` RPC has been added that uses a syntax -similar to that of `importmulti`. - -As Legacy Wallets and Descriptor Wallets use different mechanisms for storing and importing scripts and keys -the existing import RPCs have been disabled for descriptor wallets. -New export RPCs for Descriptor Wallets have not yet been added. - -The following RPCs are disabled for Descriptor Wallets: - -* importprivkey -* importpubkey -* importaddress -* importwallet -* dumpprivkey -* dumpwallet -* importmulti -* addmultisigaddress -* sethdseed - -#### Watchonly Wallets - -A Legacy Wallet contains both private keys and scripts that were being watched. -Those watched scripts would not contribute to your normal balance. In order to see the watchonly -balance and to use watchonly things in transactions, an `include_watchonly` option was added -to many RPCs that would allow users to do that. However it is easy to forget to include this option. - -Descriptor Wallets move to a per-wallet watchonly model. Instead an entire wallet is considered to be -watchonly depending on whether it was created with private keys disabled. This eliminates the need -to distinguish between things that are watchonly and things that are not within a wallet itself. - -This change does have a caveat. If a Descriptor Wallet with private keys *enabled* has -a multiple key descriptor without all of the private keys (e.g. `multi(...)` with only one private key), -then the wallet will fail to sign and broadcast transactions. Such wallets would need to use the PSBT -workflow but the typical GUI Send, `sendtoaddress`, etc. workflows would still be available, just -non-functional. - -This issue is worsened if the wallet contains both single key (e.g. `wpkh(...)`) descriptors and such -multiple key descriptors as some transactions could be signed and broadast and others not. This is -due to some transactions containing only single key inputs, while others would contain both single -key and multiple key inputs, depending on which are available and how the coin selection algorithm -selects inputs. However this is not considered to be a supported use case; multisigs -should be in their own wallets which do not already have descriptors. Although users cannot export -descriptors with private keys for now as explained earlier. - -#### BIP 44/49/84 Support - -The change to using descriptors changes the default derivation paths used by Bitcoin Core -to adhere to BIP 44/49/84. Descriptors with different derivation paths can be imported without -issue. - -### Wallet RPC changes - -- The `upgradewallet` RPC replaces the `-upgradewallet` command line option. - (#15761) -- The `settxfee` RPC will fail if the fee was set higher than the `-maxtxfee` - command line setting. The wallet will already fail to create transactions - with fees higher than `-maxtxfee`. (#18467) - GUI changes ----------- -- Wallets created or loaded in the GUI will now be automatically loaded on - startup, so they don't need to be manually reloaded next time Bitcoin Core is - started. The list of wallets to load on startup is stored in - `\/settings.json` and augments any command line or `bitcoin.conf` - `-wallet=` settings that specify more wallets to load. Wallets that are - unloaded in the GUI get removed from the settings list so they won't load - again automatically next startup. (#19754) - -- The GUI Peers window no longer displays a "Ban Score" field. This is part of - changes in 0.20.1 and in this release to the handling of misbehaving - peers. Refer to "Changes regarding misbehaving peers" in the 0.20.1 release - notes for details. (#19512) - Low-level changes ================= RPC --- -- To make RPC `sendtoaddress` more consistent with `sendmany` the following error - `sendtoaddress` codes were changed from `-4` to `-6`: - - Insufficient funds - - Fee estimation failed - - Transaction has too long of a mempool chain - -- The `sendrawtransaction` error code for exceeding `maxfeerate` has been changed from - `-26` to `-25`. The error string has been changed from "absurdly-high-fee" to - "Fee exceeds maximum configured by user (e.g. -maxtxfee, maxfeerate)." The - `testmempoolaccept` RPC returns `max-fee-exceeded` rather than `absurdly-high-fee` - as the `reject-reason`. (#19339) - -- To make wallet and rawtransaction RPCs more consistent, the error message for - exceeding maximum feerate has been changed to "Fee exceeds maximum configured by user - (e.g. -maxtxfee, maxfeerate)." (#19339) - Tests ----- -- The BIP 325 default signet can be enabled by the `-chain=signet` or `-signet` - setting. The settings `-signetchallenge` and `-signetseednode` allow - enabling a custom signet. - Credits ======= -- cgit v1.2.3