From 9cb2309050880c2887b4b5f7a7231e4fc6dc3f47 Mon Sep 17 00:00:00 2001 From: "Wladimir J. van der Laan" Date: Tue, 30 Jan 2018 14:23:36 +0100 Subject: doc: Update manpages to 0.16.99 Master was bumped to 0.16.99, so update the man pages too to avoid confusion. Tree-SHA512: 63622d6ebea2fb052ffe05fb80fe08bd627c34310a7ca22b2bc1af74003b20ab1a1fde51746ee69d401379d65232981b68541a9fc7f329e04b854507f836b19e --- doc/man/bitcoin-cli.1 | 18 +++++++++++++----- doc/man/bitcoin-qt.1 | 44 ++++++++++++++++++++++++++++++++++---------- doc/man/bitcoin-tx.1 | 10 +++++----- doc/man/bitcoind.1 | 44 ++++++++++++++++++++++++++++++++++---------- 4 files changed, 86 insertions(+), 30 deletions(-) (limited to 'doc/man') diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1 index 6787638443..168a68cb30 100644 --- a/doc/man/bitcoin-cli.1 +++ b/doc/man/bitcoin-cli.1 @@ -1,9 +1,9 @@ -.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.4. -.TH BITCOIN-CLI "1" "September 2017" "bitcoin-cli v0.15.99.0" "User Commands" +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. +.TH BITCOIN-CLI "1" "January 2018" "bitcoin-cli v0.16.99.0" "User Commands" .SH NAME -bitcoin-cli \- manual page for bitcoin-cli v0.15.99.0 +bitcoin-cli \- manual page for bitcoin-cli v0.16.99.0 .SH DESCRIPTION -Bitcoin Core RPC client version v0.15.99.0 +Bitcoin Core RPC client version v0.16.99.0 .SS "Usage:" .TP bitcoin\-cli [options] [params] @@ -25,6 +25,14 @@ Specify configuration file (default: bitcoin.conf) \fB\-datadir=\fR .IP Specify data directory +.HP +\fB\-getinfo\fR +.IP +Get general information from the remote server. Note that unlike +server\-side RPC calls, the results of \fB\-getinfo\fR is the result of +multiple non\-atomic requests. Some entries in the result may +represent results from different states (e.g. wallet balance may +be as of a different block from the chain state reported) .PP Chain selection options: .HP @@ -88,7 +96,7 @@ Send RPC for non\-default wallet on RPC server (argument is wallet filename in bitcoind directory, required if bitcoind/\-Qt runs with multiple wallets) .SH COPYRIGHT -Copyright (C) 2009-2017 The Bitcoin Core developers +Copyright (C) 2009-2018 The Bitcoin Core developers Please contribute if you find Bitcoin Core useful. Visit for further information about the software. diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1 index ae35d50ac3..a8c55fb0b3 100644 --- a/doc/man/bitcoin-qt.1 +++ b/doc/man/bitcoin-qt.1 @@ -1,9 +1,9 @@ -.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.4. -.TH BITCOIN-QT "1" "September 2017" "bitcoin-qt v0.15.99.0" "User Commands" +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. +.TH BITCOIN-QT "1" "January 2018" "bitcoin-qt v0.16.99.0" "User Commands" .SH NAME -bitcoin-qt \- manual page for bitcoin-qt v0.15.99.0 +bitcoin-qt \- manual page for bitcoin-qt v0.16.99.0 .SH DESCRIPTION -Bitcoin Core version v0.15.99.0 (64\-bit) +Bitcoin Core version v0.16.99.0 (64\-bit) Usage: .IP bitcoin\-qt [command\-line options] @@ -32,7 +32,7 @@ block hash) If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: -0000000000000000003b9ce759c2a087d52abc4266f8f4ebd6d768b89defa50a, +0000000000000000005214481d2d96f898e3d5416e43359c145944a909d242e0, testnet: 0000000002e9e7b00e1f6dc5123a04aad68dd0f0968d8c7aa45f6640795c37b1) .HP @@ -52,6 +52,11 @@ Set database cache size in megabytes (4 to 16384, default: 450) .IP Imports blocks from external blk000??.dat file on startup .HP +\fB\-debuglogfile=\fR +.IP +Specify location of debug log file: this can be an absolute path or a +path relative to the data directory (default: debug.log) +.HP \fB\-maxorphantx=\fR .IP Keep at most unconnectable transactions in memory (default: 100) @@ -76,7 +81,7 @@ Extra transactions to keep in memory for compact block reconstructions .HP \fB\-par=\fR .IP -Set the number of script verification threads (\fB\-2\fR to 16, 0 = auto, <0 = +Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 = leave that many cores free, default: 0) .HP \fB\-pid=\fR @@ -117,7 +122,8 @@ Connection options: .HP \fB\-addnode=\fR .IP -Add a node to connect to and attempt to keep the connection open +Add a node to connect to and attempt to keep the connection open (see +the `addnode` RPC command help for more info) .HP \fB\-banscore=\fR .IP @@ -136,7 +142,8 @@ for IPv6 \fB\-connect=\fR .IP Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic -connections +connections (the rules for this peer are the same as for +\fB\-addnode\fR) .HP \fB\-discover\fR .IP @@ -258,6 +265,18 @@ Tries to keep outbound traffic under the given target (in MiB per 24h), .PP Wallet options: .HP +\fB\-addresstype\fR +.IP +What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32", +default: "p2sh\-segwit") +.HP +\fB\-changetype\fR +.IP +What type of change to use ("legacy", "p2sh\-segwit", or "bech32"). +Default is same as \fB\-addresstype\fR, except when +\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when +sending to a native segwit address) +.HP \fB\-disablewallet\fR .IP Do not load the wallet and disable wallet RPC calls @@ -307,7 +326,7 @@ confirmation on average within n blocks (default: 6) .HP \fB\-walletrbf\fR .IP -Send transactions with full\-RBF opt\-in enabled (default: 0) +Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0) .HP \fB\-upgradewallet\fR .IP @@ -321,6 +340,11 @@ Specify wallet file (within data directory) (default: wallet.dat) .IP Make the wallet broadcast transactions (default: 1) .HP +\fB\-walletdir=\fR +.IP +Specify directory to hold wallets (default: /wallets if it +exists, otherwise ) +.HP \fB\-walletnotify=\fR .IP Execute command when a wallet transaction changes (%s in cmd is replaced @@ -542,7 +566,7 @@ Show splash screen on startup (default: 1) .IP Reset all settings changed in the GUI .SH COPYRIGHT -Copyright (C) 2009-2017 The Bitcoin Core developers +Copyright (C) 2009-2018 The Bitcoin Core developers Please contribute if you find Bitcoin Core useful. Visit for further information about the software. diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1 index 8b72fbde05..8e6994ac07 100644 --- a/doc/man/bitcoin-tx.1 +++ b/doc/man/bitcoin-tx.1 @@ -1,9 +1,9 @@ -.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.4. -.TH BITCOIN-TX "1" "September 2017" "bitcoin-tx v0.15.99.0" "User Commands" +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. +.TH BITCOIN-TX "1" "January 2018" "bitcoin-tx v0.16.99.0" "User Commands" .SH NAME -bitcoin-tx \- manual page for bitcoin-tx v0.15.99.0 +bitcoin-tx \- manual page for bitcoin-tx v0.16.99.0 .SH DESCRIPTION -Bitcoin Core bitcoin\-tx utility version v0.15.99.0 +Bitcoin Core bitcoin\-tx utility version v0.16.99.0 .SS "Usage:" .TP bitcoin\-tx [options] [commands] @@ -112,7 +112,7 @@ set=NAME:JSON\-STRING .IP Set register NAME to given JSON\-STRING .SH COPYRIGHT -Copyright (C) 2009-2017 The Bitcoin Core developers +Copyright (C) 2009-2018 The Bitcoin Core developers Please contribute if you find Bitcoin Core useful. Visit for further information about the software. diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1 index baf747436f..8728965b2a 100644 --- a/doc/man/bitcoind.1 +++ b/doc/man/bitcoind.1 @@ -1,9 +1,9 @@ -.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.4. -.TH BITCOIND "1" "September 2017" "bitcoind v0.15.99.0" "User Commands" +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. +.TH BITCOIND "1" "January 2018" "bitcoind v0.16.99.0" "User Commands" .SH NAME -bitcoind \- manual page for bitcoind v0.15.99.0 +bitcoind \- manual page for bitcoind v0.16.99.0 .SH DESCRIPTION -Bitcoin Core Daemon version v0.15.99.0 +Bitcoin Core Daemon version v0.16.99.0 .SS "Usage:" .TP bitcoind [options] @@ -33,7 +33,7 @@ block hash) If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: -0000000000000000003b9ce759c2a087d52abc4266f8f4ebd6d768b89defa50a, +0000000000000000005214481d2d96f898e3d5416e43359c145944a909d242e0, testnet: 0000000002e9e7b00e1f6dc5123a04aad68dd0f0968d8c7aa45f6640795c37b1) .HP @@ -57,6 +57,11 @@ Set database cache size in megabytes (4 to 16384, default: 450) .IP Imports blocks from external blk000??.dat file on startup .HP +\fB\-debuglogfile=\fR +.IP +Specify location of debug log file: this can be an absolute path or a +path relative to the data directory (default: debug.log) +.HP \fB\-maxorphantx=\fR .IP Keep at most unconnectable transactions in memory (default: 100) @@ -81,7 +86,7 @@ Extra transactions to keep in memory for compact block reconstructions .HP \fB\-par=\fR .IP -Set the number of script verification threads (\fB\-2\fR to 16, 0 = auto, <0 = +Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 = leave that many cores free, default: 0) .HP \fB\-pid=\fR @@ -122,7 +127,8 @@ Connection options: .HP \fB\-addnode=\fR .IP -Add a node to connect to and attempt to keep the connection open +Add a node to connect to and attempt to keep the connection open (see +the `addnode` RPC command help for more info) .HP \fB\-banscore=\fR .IP @@ -141,7 +147,8 @@ for IPv6 \fB\-connect=\fR .IP Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic -connections +connections (the rules for this peer are the same as for +\fB\-addnode\fR) .HP \fB\-discover\fR .IP @@ -263,6 +270,18 @@ Tries to keep outbound traffic under the given target (in MiB per 24h), .PP Wallet options: .HP +\fB\-addresstype\fR +.IP +What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32", +default: "p2sh\-segwit") +.HP +\fB\-changetype\fR +.IP +What type of change to use ("legacy", "p2sh\-segwit", or "bech32"). +Default is same as \fB\-addresstype\fR, except when +\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when +sending to a native segwit address) +.HP \fB\-disablewallet\fR .IP Do not load the wallet and disable wallet RPC calls @@ -312,7 +331,7 @@ confirmation on average within n blocks (default: 6) .HP \fB\-walletrbf\fR .IP -Send transactions with full\-RBF opt\-in enabled (default: 0) +Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0) .HP \fB\-upgradewallet\fR .IP @@ -326,6 +345,11 @@ Specify wallet file (within data directory) (default: wallet.dat) .IP Make the wallet broadcast transactions (default: 1) .HP +\fB\-walletdir=\fR +.IP +Specify directory to hold wallets (default: /wallets if it +exists, otherwise ) +.HP \fB\-walletnotify=\fR .IP Execute command when a wallet transaction changes (%s in cmd is replaced @@ -521,7 +545,7 @@ non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1) .IP Set the number of threads to service RPC calls (default: 4) .SH COPYRIGHT -Copyright (C) 2009-2017 The Bitcoin Core developers +Copyright (C) 2009-2018 The Bitcoin Core developers Please contribute if you find Bitcoin Core useful. Visit for further information about the software. -- cgit v1.2.3