From 1fc4ec7bf224748d3d6271bffa23d121f015cbf3 Mon Sep 17 00:00:00 2001 From: mrbandrews Date: Tue, 29 Nov 2016 12:39:19 -0500 Subject: Add pruneblockchain RPC to enable manual block file pruning. --- doc/man/bitcoin-qt.1 | 12 ++--- doc/man/bitcoind.1 | 12 ++--- qa/rpc-tests/pruning.py | 113 ++++++++++++++++++++++++++++++++++++++++++++++-- src/init.cpp | 16 ++++--- src/rpc/blockchain.cpp | 31 +++++++++++++ src/rpc/client.cpp | 1 + src/validation.cpp | 44 ++++++++++++++++--- src/validation.h | 2 + 8 files changed, 207 insertions(+), 24 deletions(-) diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1 index 24b529dac1..2129a151e2 100644 --- a/doc/man/bitcoin-qt.1 +++ b/doc/man/bitcoin-qt.1 @@ -75,11 +75,13 @@ Specify pid file (default: bitcoind.pid) .HP \fB\-prune=\fR .IP -Reduce storage requirements by pruning (deleting) old blocks. This mode -is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting -this setting requires re\-downloading the entire blockchain. -(default: 0 = disable pruning blocks, >550 = target size in MiB -to use for block files) +Reduce storage requirements by enabling pruning (deleting) of old blocks. +This allows the pruneblockchain RPC to be called to delete specific blocks, +and enables automatic pruning of old blocks if a target size in MiB is +provided. This mode is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. +Warning: Reverting this setting requires re\-downloading the entire blockchain. +(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >550 = +automatically prune block files to stay under the specified target size in MiB) .HP \fB\-reindex\-chainstate\fR .IP diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1 index b99657a5fa..47539d8131 100644 --- a/doc/man/bitcoind.1 +++ b/doc/man/bitcoind.1 @@ -80,11 +80,13 @@ Specify pid file (default: bitcoind.pid) .HP \fB\-prune=\fR .IP -Reduce storage requirements by pruning (deleting) old blocks. This mode -is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting -this setting requires re\-downloading the entire blockchain. -(default: 0 = disable pruning blocks, >550 = target size in MiB -to use for block files) +Reduce storage requirements by enabling pruning (deleting) of old blocks. +This allows the pruneblockchain RPC to be called to delete specific blocks, +and enables automatic pruning of old blocks if a target size in MiB is +provided. This mode is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. +Warning: Reverting this setting requires re\-downloading the entire blockchain. +(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >550 = +automatically prune block files to stay under the specified target size in MiB) .HP \fB\-reindex\-chainstate\fR .IP diff --git a/qa/rpc-tests/pruning.py b/qa/rpc-tests/pruning.py index 78b8938e4a..062bc8dda4 100755 --- a/qa/rpc-tests/pruning.py +++ b/qa/rpc-tests/pruning.py @@ -25,7 +25,7 @@ class PruneTest(BitcoinTestFramework): def __init__(self): super().__init__() self.setup_clean_chain = True - self.num_nodes = 3 + self.num_nodes = 5 # Cache for utxos, as the listunspent may take a long time later in the test self.utxo_cache_0 = [] @@ -43,10 +43,21 @@ class PruneTest(BitcoinTestFramework): self.nodes.append(start_node(2, self.options.tmpdir, ["-debug","-maxreceivebuffer=20000","-prune=550"], timewait=900)) self.prunedir = self.options.tmpdir+"/node2/regtest/blocks/" + # Create node 3 to test manual pruning (it will be re-started with manual pruning later) + self.nodes.append(start_node(3, self.options.tmpdir, ["-debug=0","-maxreceivebuffer=20000","-blockmaxsize=999000"], timewait=900)) + self.manualdir = self.options.tmpdir+"/node3/regtest/blocks/" + + # Create node 4 to test wallet in prune mode, but do not connect + self.nodes.append(start_node(4, self.options.tmpdir, ["-debug=0", "-prune=550"])) + + # Determine default relay fee + self.relayfee = self.nodes[0].getnetworkinfo()["relayfee"] + connect_nodes(self.nodes[0], 1) connect_nodes(self.nodes[1], 2) connect_nodes(self.nodes[2], 0) - sync_blocks(self.nodes[0:3]) + connect_nodes(self.nodes[0], 3) + sync_blocks(self.nodes[0:4]) def create_big_chain(self): # Start by creating some coinbases we can spend later @@ -57,7 +68,7 @@ class PruneTest(BitcoinTestFramework): for i in range(645): mine_large_block(self.nodes[0], self.utxo_cache_0) - sync_blocks(self.nodes[0:3]) + sync_blocks(self.nodes[0:4]) def test_height_min(self): if not os.path.isfile(self.prunedir+"blk00000.dat"): @@ -212,6 +223,93 @@ class PruneTest(BitcoinTestFramework): # Verify we can now have the data for a block previously pruned assert(self.nodes[2].getblock(self.forkhash)["height"] == self.forkheight) + def manual_test(self): + # at this point, node3 has 995 blocks and has not yet run in prune mode + self.nodes[3] = start_node(3, self.options.tmpdir, ["-debug=0"], timewait=900) + assert_raises_message(JSONRPCException, "not in prune mode", self.nodes[3].pruneblockchain, 500) + stop_node(self.nodes[3],3) + + # now re-start in manual pruning mode + self.nodes[3] = start_node(3, self.options.tmpdir, ["-debug=0","-prune=1"], timewait=900) + assert_equal(self.nodes[3].getblockcount(), 995) + + # should not prune because chain tip of node 3 (995) < PruneAfterHeight (1000) + assert_raises_message(JSONRPCException, "Blockchain is too short for pruning", self.nodes[3].pruneblockchain, 500) + + # mine 6 blocks so we are at height 1001 (i.e., above PruneAfterHeight) + self.nodes[3].generate(6) + + # negative and zero inputs should raise an exception + try: + self.nodes[3].pruneblockchain(-10) + raise AssertionError("pruneblockchain(-10) should have failed.") + except: + pass + + try: + self.nodes[3].pruneblockchain(0) + raise AssertionError("pruneblockchain(0) should have failed.") + except: + pass + + # height=100 too low to prune first block file so this is a no-op + self.nodes[3].pruneblockchain(100) + if not os.path.isfile(self.manualdir+"blk00000.dat"): + raise AssertionError("blk00000.dat is missing when should still be there") + + # height=500 should prune first file + self.nodes[3].pruneblockchain(500) + if os.path.isfile(self.manualdir+"blk00000.dat"): + raise AssertionError("blk00000.dat is still there, should be pruned by now") + if not os.path.isfile(self.manualdir+"blk00001.dat"): + raise AssertionError("blk00001.dat is missing when should still be there") + + # height=650 should prune second file + self.nodes[3].pruneblockchain(650) + if os.path.isfile(self.manualdir+"blk00001.dat"): + raise AssertionError("blk00001.dat is still there, should be pruned by now") + + # height=1000 should not prune anything more, because tip-288 is in blk00002.dat. + self.nodes[3].pruneblockchain(1000) + if not os.path.isfile(self.manualdir+"blk00002.dat"): + raise AssertionError("blk00002.dat is still there, should be pruned by now") + + # advance the tip so blk00002.dat and blk00003.dat can be pruned (the last 288 blocks should now be in blk00004.dat) + self.nodes[3].generate(288) + self.nodes[3].pruneblockchain(1000) + if os.path.isfile(self.manualdir+"blk00002.dat"): + raise AssertionError("blk00002.dat is still there, should be pruned by now") + if os.path.isfile(self.manualdir+"blk00003.dat"): + raise AssertionError("blk00003.dat is still there, should be pruned by now") + + # stop node, start back up with auto-prune at 550MB, make sure still runs + stop_node(self.nodes[3],3) + self.nodes[3] = start_node(3, self.options.tmpdir, ["-debug=0","-prune=550"], timewait=900) + + print("Success") + + def wallet_test(self): + # check that the pruning node's wallet is still in good shape + print("Stop and start pruning node to trigger wallet rescan") + try: + stop_node(self.nodes[2], 2) + start_node(2, self.options.tmpdir, ["-debug=1","-prune=550"]) + print("Success") + except Exception as detail: + raise AssertionError("Wallet test: unable to re-start the pruning node") + + # check that wallet loads loads successfully when restarting a pruned node after IBD. + # this was reported to fail in #7494. + print ("Syncing node 4 to test wallet") + connect_nodes(self.nodes[0], 4) + nds = [self.nodes[0], self.nodes[4]] + sync_blocks(nds) + try: + stop_node(self.nodes[4],4) #stop and start to trigger rescan + start_node(4, self.options.tmpdir, ["-debug=1","-prune=550"]) + print ("Success") + except Exception as detail: + raise AssertionError("Wallet test: unable to re-start node4") def run_test(self): print("Warning! This test requires 4GB of disk space and takes over 30 mins (up to 2 hours)") @@ -226,6 +324,9 @@ class PruneTest(BitcoinTestFramework): # Start by mining a simple chain that all nodes have # N0=N1=N2 **...*(995) + # stop manual-pruning node with 995 blocks + stop_node(self.nodes[3],3) + print("Check that we haven't started pruning yet because we're below PruneAfterHeight") self.test_height_min() # Extend this chain past the PruneAfterHeight @@ -308,6 +409,12 @@ class PruneTest(BitcoinTestFramework): # # N1 doesn't change because 1033 on main chain (*) is invalid + print("Test manual pruning") + self.manual_test() + + print("Test wallet re-scan") + self.wallet_test() + print("Done") if __name__ == '__main__': diff --git a/src/init.cpp b/src/init.cpp index 992ce8ebdc..9ac69b7d39 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -351,9 +351,9 @@ std::string HelpMessage(HelpMessageMode mode) #ifndef WIN32 strUsage += HelpMessageOpt("-pid=", strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME)); #endif - strUsage += HelpMessageOpt("-prune=", strprintf(_("Reduce storage requirements by pruning (deleting) old blocks. This mode is incompatible with -txindex and -rescan. " + strUsage += HelpMessageOpt("-prune=", strprintf(_("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. " "Warning: Reverting this setting requires re-downloading the entire blockchain. " - "(default: 0 = disable pruning blocks, >%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); + "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); strUsage += HelpMessageOpt("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks")); strUsage += HelpMessageOpt("-reindex", _("Rebuild chain state and block index from the blk*.dat files on disk")); #ifndef WIN32 @@ -936,12 +936,16 @@ bool AppInitParameterInteraction() nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS; // block pruning; get the amount of disk space (in MiB) to allot for block & undo files - int64_t nSignedPruneTarget = GetArg("-prune", 0) * 1024 * 1024; - if (nSignedPruneTarget < 0) { + int64_t nPruneArg = GetArg("-prune", 0); + if (nPruneArg < 0) { return InitError(_("Prune cannot be configured with a negative value.")); } - nPruneTarget = (uint64_t) nSignedPruneTarget; - if (nPruneTarget) { + nPruneTarget = (uint64_t) nPruneArg * 1024 * 1024; + if (nPruneArg == 1) { // manual pruning: -prune=1 + LogPrintf("Block pruning enabled. Use RPC call pruneblockchain(height) to manually prune block and undo files.\n"); + nPruneTarget = std::numeric_limits::max(); + fPruneMode = true; + } else if (nPruneTarget) { if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) { return InitError(strprintf(_("Prune configured below the minimum of %d MiB. Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); } diff --git a/src/rpc/blockchain.cpp b/src/rpc/blockchain.cpp index 0b42c1d625..f49a333279 100644 --- a/src/rpc/blockchain.cpp +++ b/src/rpc/blockchain.cpp @@ -814,6 +814,36 @@ static bool GetUTXOStats(CCoinsView *view, CCoinsStats &stats) return true; } +UniValue pruneblockchain(const JSONRPCRequest& request) +{ + if (request.fHelp || request.params.size() != 1) + throw runtime_error( + "pruneblockchain\n" + "\nArguments:\n" + "1. \"height\" (int, required) The block height to prune up to.\n"); + + if (!fPruneMode) + throw JSONRPCError(RPC_METHOD_NOT_FOUND, "Cannot prune blocks because node is not in prune mode."); + + LOCK(cs_main); + + int heightParam = request.params[0].get_int(); + if (heightParam < 0) + throw JSONRPCError(RPC_INVALID_PARAMETER, "Negative block height."); + + unsigned int height = (unsigned int) heightParam; + unsigned int chainHeight = (unsigned int) chainActive.Height(); + if (chainHeight < Params().PruneAfterHeight()) + throw JSONRPCError(RPC_INTERNAL_ERROR, "Blockchain is too short for pruning."); + else if (height > chainHeight) + throw JSONRPCError(RPC_INVALID_PARAMETER, "Blockchain is shorter than the attempted prune height."); + else if (height > chainHeight - MIN_BLOCKS_TO_KEEP) + LogPrint("rpc", "Attempt to prune blocks close to the tip. Retaining the minimum number of blocks."); + + PruneBlockFilesManual(height); + return NullUniValue; +} + UniValue gettxoutsetinfo(const JSONRPCRequest& request) { if (request.fHelp || request.params.size() != 0) @@ -1384,6 +1414,7 @@ static const CRPCCommand commands[] = { "blockchain", "getrawmempool", &getrawmempool, true, {"verbose"} }, { "blockchain", "gettxout", &gettxout, true, {"txid","n","include_mempool"} }, { "blockchain", "gettxoutsetinfo", &gettxoutsetinfo, true, {} }, + { "blockchain", "pruneblockchain", &pruneblockchain, true, {"height"} }, { "blockchain", "verifychain", &verifychain, true, {"checklevel","nblocks"} }, { "blockchain", "preciousblock", &preciousblock, true, {"blockhash"} }, diff --git a/src/rpc/client.cpp b/src/rpc/client.cpp index 422d005f0c..5d3c458455 100644 --- a/src/rpc/client.cpp +++ b/src/rpc/client.cpp @@ -103,6 +103,7 @@ static const CRPCConvertParam vRPCConvertParams[] = { "importmulti", 1, "options" }, { "verifychain", 0, "checklevel" }, { "verifychain", 1, "nblocks" }, + { "pruneblockchain", 0, "height" }, { "keypoolrefill", 0, "newsize" }, { "getrawmempool", 0, "verbose" }, { "estimatefee", 0, "nblocks" }, diff --git a/src/validation.cpp b/src/validation.cpp index 37a4186e0a..109a71fe74 100644 --- a/src/validation.cpp +++ b/src/validation.cpp @@ -185,7 +185,8 @@ enum FlushStateMode { }; // See definition for documentation -bool static FlushStateToDisk(CValidationState &state, FlushStateMode mode); +bool static FlushStateToDisk(CValidationState &state, FlushStateMode mode, int nManualPruneHeight=0); +void FindFilesToPruneManual(std::set& setFilesToPrune, int nManualPruneHeight); bool IsFinalTx(const CTransaction &tx, int nBlockHeight, int64_t nBlockTime) { @@ -1934,7 +1935,7 @@ bool ConnectBlock(const CBlock& block, CValidationState& state, CBlockIndex* pin * if they're too large, if it's been a while since the last write, * or always and in all cases if we're in prune mode and are deleting files. */ -bool static FlushStateToDisk(CValidationState &state, FlushStateMode mode) { +bool static FlushStateToDisk(CValidationState &state, FlushStateMode mode, int nManualPruneHeight) { int64_t nMempoolUsage = mempool.DynamicMemoryUsage(); const CChainParams& chainparams = Params(); LOCK2(cs_main, cs_LastBlockFile); @@ -1944,9 +1945,13 @@ bool static FlushStateToDisk(CValidationState &state, FlushStateMode mode) { std::set setFilesToPrune; bool fFlushForPrune = false; try { - if (fPruneMode && fCheckForPruning && !fReindex) { - FindFilesToPrune(setFilesToPrune, chainparams.PruneAfterHeight()); - fCheckForPruning = false; + if (fPruneMode && (fCheckForPruning || nManualPruneHeight > 0) && !fReindex) { + if (nManualPruneHeight > 0) { + FindFilesToPruneManual(setFilesToPrune, nManualPruneHeight); + } else { + FindFilesToPrune(setFilesToPrune, chainparams.PruneAfterHeight()); + fCheckForPruning = false; + } if (!setFilesToPrune.empty()) { fFlushForPrune = true; if (!fHavePruned) { @@ -3247,6 +3252,35 @@ void UnlinkPrunedFiles(std::set& setFilesToPrune) } } +/* Calculate the block/rev files to delete based on height specified by user with RPC command pruneblockchain */ +void FindFilesToPruneManual(std::set& setFilesToPrune, int nManualPruneHeight) +{ + assert(fPruneMode && nManualPruneHeight > 0); + + LOCK2(cs_main, cs_LastBlockFile); + if (chainActive.Tip() == NULL) + return; + + // last block to prune is the lesser of (user-specified height, MIN_BLOCKS_TO_KEEP from the tip) + unsigned int nLastBlockWeCanPrune = min((unsigned)nManualPruneHeight, chainActive.Tip()->nHeight - MIN_BLOCKS_TO_KEEP); + int count=0; + for (int fileNumber = 0; fileNumber < nLastBlockFile; fileNumber++) { + if (vinfoBlockFile[fileNumber].nSize == 0 || vinfoBlockFile[fileNumber].nHeightLast > nLastBlockWeCanPrune) + continue; + PruneOneBlockFile(fileNumber); + setFilesToPrune.insert(fileNumber); + count++; + } + LogPrintf("Prune (Manual): prune_height=%d removed %d blk/rev pairs\n", nLastBlockWeCanPrune, count); +} + +/* This function is called from the RPC code for pruneblockchain */ +void PruneBlockFilesManual(int nManualPruneHeight) +{ + CValidationState state; + FlushStateToDisk(state, FLUSH_STATE_NONE, nManualPruneHeight); +} + /* Calculate the block/rev files that should be deleted to remain under target*/ void FindFilesToPrune(std::set& setFilesToPrune, uint64_t nPruneAfterHeight) { diff --git a/src/validation.h b/src/validation.h index 631602a701..f5e76c7d31 100644 --- a/src/validation.h +++ b/src/validation.h @@ -309,6 +309,8 @@ CBlockIndex * InsertBlockIndex(uint256 hash); void FlushStateToDisk(); /** Prune block files and flush state to disk. */ void PruneAndFlush(); +/** Prune block files up to a given height */ +void PruneBlockFilesManual(int nPruneUpToHeight); /** (try to) add transaction to memory pool **/ bool AcceptToMemoryPool(CTxMemPool& pool, CValidationState &state, const CTransactionRef &tx, bool fLimitFree, -- cgit v1.2.3 From afffeea7d98ba358acd54a89bc0e7ae1c4d54023 Mon Sep 17 00:00:00 2001 From: Russell Yanofsky Date: Mon, 9 Jan 2017 13:35:12 -0500 Subject: fixup! Add pruneblockchain RPC to enable manual block file pruning. Extend pruneblockchain RPC to accept block timestamps as well as block indices. --- qa/rpc-tests/pruning.py | 97 ++++++++++++++++++++++++++++--------------------- src/rpc/blockchain.cpp | 12 +++++- 2 files changed, 67 insertions(+), 42 deletions(-) diff --git a/qa/rpc-tests/pruning.py b/qa/rpc-tests/pruning.py index 062bc8dda4..25f0779003 100755 --- a/qa/rpc-tests/pruning.py +++ b/qa/rpc-tests/pruning.py @@ -25,7 +25,7 @@ class PruneTest(BitcoinTestFramework): def __init__(self): super().__init__() self.setup_clean_chain = True - self.num_nodes = 5 + self.num_nodes = 6 # Cache for utxos, as the listunspent may take a long time later in the test self.utxo_cache_0 = [] @@ -43,12 +43,12 @@ class PruneTest(BitcoinTestFramework): self.nodes.append(start_node(2, self.options.tmpdir, ["-debug","-maxreceivebuffer=20000","-prune=550"], timewait=900)) self.prunedir = self.options.tmpdir+"/node2/regtest/blocks/" - # Create node 3 to test manual pruning (it will be re-started with manual pruning later) + # Create nodes 3 and 4 to test manual pruning (they will be re-started with manual pruning later) self.nodes.append(start_node(3, self.options.tmpdir, ["-debug=0","-maxreceivebuffer=20000","-blockmaxsize=999000"], timewait=900)) - self.manualdir = self.options.tmpdir+"/node3/regtest/blocks/" + self.nodes.append(start_node(4, self.options.tmpdir, ["-debug=0","-maxreceivebuffer=20000","-blockmaxsize=999000"], timewait=900)) - # Create node 4 to test wallet in prune mode, but do not connect - self.nodes.append(start_node(4, self.options.tmpdir, ["-debug=0", "-prune=550"])) + # Create nodes 5 to test wallet in prune mode, but do not connect + self.nodes.append(start_node(5, self.options.tmpdir, ["-debug=0", "-prune=550"])) # Determine default relay fee self.relayfee = self.nodes[0].getnetworkinfo()["relayfee"] @@ -57,7 +57,8 @@ class PruneTest(BitcoinTestFramework): connect_nodes(self.nodes[1], 2) connect_nodes(self.nodes[2], 0) connect_nodes(self.nodes[0], 3) - sync_blocks(self.nodes[0:4]) + connect_nodes(self.nodes[0], 4) + sync_blocks(self.nodes[0:5]) def create_big_chain(self): # Start by creating some coinbases we can spend later @@ -68,7 +69,7 @@ class PruneTest(BitcoinTestFramework): for i in range(645): mine_large_block(self.nodes[0], self.utxo_cache_0) - sync_blocks(self.nodes[0:4]) + sync_blocks(self.nodes[0:5]) def test_height_min(self): if not os.path.isfile(self.prunedir+"blk00000.dat"): @@ -223,68 +224,78 @@ class PruneTest(BitcoinTestFramework): # Verify we can now have the data for a block previously pruned assert(self.nodes[2].getblock(self.forkhash)["height"] == self.forkheight) - def manual_test(self): - # at this point, node3 has 995 blocks and has not yet run in prune mode - self.nodes[3] = start_node(3, self.options.tmpdir, ["-debug=0"], timewait=900) - assert_raises_message(JSONRPCException, "not in prune mode", self.nodes[3].pruneblockchain, 500) - stop_node(self.nodes[3],3) + def manual_test(self, node_number, use_timestamp): + # at this point, node has 995 blocks and has not yet run in prune mode + node = self.nodes[node_number] = start_node(node_number, self.options.tmpdir, ["-debug=0"], timewait=900) + assert_equal(node.getblockcount(), 995) + assert_raises_message(JSONRPCException, "not in prune mode", node.pruneblockchain, 500) + stop_node(node, node_number) # now re-start in manual pruning mode - self.nodes[3] = start_node(3, self.options.tmpdir, ["-debug=0","-prune=1"], timewait=900) - assert_equal(self.nodes[3].getblockcount(), 995) + node = self.nodes[node_number] = start_node(node_number, self.options.tmpdir, ["-debug=0","-prune=1"], timewait=900) + assert_equal(node.getblockcount(), 995) + + def height(index): + if use_timestamp: + return node.getblockheader(node.getblockhash(index))["time"] + else: + return index + + def has_block(index): + return os.path.isfile(self.options.tmpdir + "/node{}/regtest/blocks/blk{:05}.dat".format(node_number, index)) # should not prune because chain tip of node 3 (995) < PruneAfterHeight (1000) - assert_raises_message(JSONRPCException, "Blockchain is too short for pruning", self.nodes[3].pruneblockchain, 500) + assert_raises_message(JSONRPCException, "Blockchain is too short for pruning", node.pruneblockchain, height(500)) # mine 6 blocks so we are at height 1001 (i.e., above PruneAfterHeight) - self.nodes[3].generate(6) + node.generate(6) # negative and zero inputs should raise an exception try: - self.nodes[3].pruneblockchain(-10) + node.pruneblockchain(-10) raise AssertionError("pruneblockchain(-10) should have failed.") except: pass try: - self.nodes[3].pruneblockchain(0) + node.pruneblockchain(0) raise AssertionError("pruneblockchain(0) should have failed.") except: pass # height=100 too low to prune first block file so this is a no-op - self.nodes[3].pruneblockchain(100) - if not os.path.isfile(self.manualdir+"blk00000.dat"): + node.pruneblockchain(height(100)) + if not has_block(0): raise AssertionError("blk00000.dat is missing when should still be there") # height=500 should prune first file - self.nodes[3].pruneblockchain(500) - if os.path.isfile(self.manualdir+"blk00000.dat"): + node.pruneblockchain(height(500)) + if has_block(0): raise AssertionError("blk00000.dat is still there, should be pruned by now") - if not os.path.isfile(self.manualdir+"blk00001.dat"): + if not has_block(1): raise AssertionError("blk00001.dat is missing when should still be there") # height=650 should prune second file - self.nodes[3].pruneblockchain(650) - if os.path.isfile(self.manualdir+"blk00001.dat"): + node.pruneblockchain(height(650)) + if has_block(1): raise AssertionError("blk00001.dat is still there, should be pruned by now") # height=1000 should not prune anything more, because tip-288 is in blk00002.dat. - self.nodes[3].pruneblockchain(1000) - if not os.path.isfile(self.manualdir+"blk00002.dat"): + node.pruneblockchain(height(1000)) + if not has_block(2): raise AssertionError("blk00002.dat is still there, should be pruned by now") # advance the tip so blk00002.dat and blk00003.dat can be pruned (the last 288 blocks should now be in blk00004.dat) - self.nodes[3].generate(288) - self.nodes[3].pruneblockchain(1000) - if os.path.isfile(self.manualdir+"blk00002.dat"): + node.generate(288) + node.pruneblockchain(height(1000)) + if has_block(2): raise AssertionError("blk00002.dat is still there, should be pruned by now") - if os.path.isfile(self.manualdir+"blk00003.dat"): + if has_block(3): raise AssertionError("blk00003.dat is still there, should be pruned by now") # stop node, start back up with auto-prune at 550MB, make sure still runs - stop_node(self.nodes[3],3) - self.nodes[3] = start_node(3, self.options.tmpdir, ["-debug=0","-prune=550"], timewait=900) + stop_node(node, node_number) + self.nodes[node_number] = start_node(node_number, self.options.tmpdir, ["-debug=0","-prune=550"], timewait=900) print("Success") @@ -300,16 +311,16 @@ class PruneTest(BitcoinTestFramework): # check that wallet loads loads successfully when restarting a pruned node after IBD. # this was reported to fail in #7494. - print ("Syncing node 4 to test wallet") - connect_nodes(self.nodes[0], 4) - nds = [self.nodes[0], self.nodes[4]] + print ("Syncing node 5 to test wallet") + connect_nodes(self.nodes[0], 5) + nds = [self.nodes[0], self.nodes[5]] sync_blocks(nds) try: - stop_node(self.nodes[4],4) #stop and start to trigger rescan - start_node(4, self.options.tmpdir, ["-debug=1","-prune=550"]) + stop_node(self.nodes[5],5) #stop and start to trigger rescan + start_node(5, self.options.tmpdir, ["-debug=1","-prune=550"]) print ("Success") except Exception as detail: - raise AssertionError("Wallet test: unable to re-start node4") + raise AssertionError("Wallet test: unable to re-start node5") def run_test(self): print("Warning! This test requires 4GB of disk space and takes over 30 mins (up to 2 hours)") @@ -326,6 +337,7 @@ class PruneTest(BitcoinTestFramework): # stop manual-pruning node with 995 blocks stop_node(self.nodes[3],3) + stop_node(self.nodes[4],4) print("Check that we haven't started pruning yet because we're below PruneAfterHeight") self.test_height_min() @@ -409,8 +421,11 @@ class PruneTest(BitcoinTestFramework): # # N1 doesn't change because 1033 on main chain (*) is invalid - print("Test manual pruning") - self.manual_test() + print("Test manual pruning with block indices") + self.manual_test(3, use_timestamp=False) + + print("Test manual pruning with timestamps") + self.manual_test(4, use_timestamp=True) print("Test wallet re-scan") self.wallet_test() diff --git a/src/rpc/blockchain.cpp b/src/rpc/blockchain.cpp index f49a333279..e828618a82 100644 --- a/src/rpc/blockchain.cpp +++ b/src/rpc/blockchain.cpp @@ -820,7 +820,7 @@ UniValue pruneblockchain(const JSONRPCRequest& request) throw runtime_error( "pruneblockchain\n" "\nArguments:\n" - "1. \"height\" (int, required) The block height to prune up to.\n"); + "1. \"height\" (numeric, required) The block height to prune up to. May be set to a discrete height, or to a unix timestamp to prune based on block time.\n"); if (!fPruneMode) throw JSONRPCError(RPC_METHOD_NOT_FOUND, "Cannot prune blocks because node is not in prune mode."); @@ -831,6 +831,16 @@ UniValue pruneblockchain(const JSONRPCRequest& request) if (heightParam < 0) throw JSONRPCError(RPC_INVALID_PARAMETER, "Negative block height."); + // Height value more than a billion is too high to be a block height, and + // too low to be a block time (corresponds to timestamp from Sep 2001). + if (heightParam > 1000000000) { + CBlockIndex* pindex = chainActive.FindLatestBefore(heightParam); + if (!pindex) { + throw JSONRPCError(RPC_INTERNAL_ERROR, "Could not find block before specified timestamp."); + } + heightParam = pindex->nHeight; + } + unsigned int height = (unsigned int) heightParam; unsigned int chainHeight = (unsigned int) chainActive.Height(); if (chainHeight < Params().PruneAfterHeight()) -- cgit v1.2.3