doc: add initial release notes for v24.1

Move historical 24.0.1 to doc/release-notes.

2 files changed, 417 insertions, 329 deletions

diff --git a/doc/release-notes.md b/doc/release-notes.md
index 24920ba450..19f604c66b 100644
--- a/doc/release-notes.md
+++ b/doc/release-notes.md
@@ -1,12 +1,9 @@
-24.0.1 Release Notes
+24.1rc1 Release Notes
 ====================
 
-Due to last-minute issues (#26616), 24.0, although tagged, was never fully
-announced or released.
+Bitcoin Core version 24.1rc1 is now available from:
 
-Bitcoin Core version 24.0.1 is now available from:
-
-  <https://bitcoincore.org/bin/bitcoin-core-24.0.1/>
+  <https://bitcoincore.org/bin/bitcoin-core-24.1/test.rc1/>
 
 This release includes new features, various bug fixes and performance
 improvements, as well as updated translations.
@@ -40,352 +37,52 @@ Core should also work on most other Unix-like systems but is not as
 frequently tested on them.  It is not recommended to use Bitcoin Core on
 unsupported systems.
 
-Notice of new option for transaction replacement policies
-=========================================================
-
-This version of Bitcoin Core adds a new `mempoolfullrbf` configuration
-option which allows users to change the policy their individual node
-will use for relaying and mining unconfirmed transactions.  The option
-defaults to the same policy that was used in previous releases and no
-changes to node policy will occur if everyone uses the default.
-
-Some Bitcoin services today expect that the first version of an
-unconfirmed transaction that they see will be the version of the
-transaction that ultimately gets confirmed---a transaction acceptance
-policy sometimes called "first-seen".
-
-The Bitcoin Protocol does not, and cannot, provide any assurance that
-the first version of an unconfirmed transaction seen by a particular
-node will be the version that gets confirmed.  If there are multiple
-versions of the same unconfirmed transaction available, only the miner
-who includes one of those transactions in a block gets to decide which
-version of the transaction gets confirmed.
-
-Despite this lack of assurance, multiple merchants and services today
-still make this assumption.
-
-There are several benefits to users from removing this *first-seen*
-simplification.  One key benefit, the ability for the sender of a
-transaction to replace it with an alternative version paying higher
-fees, was realized in [Bitcoin Core 0.12.0][] (February 2016) with the
-introduction of [BIP125][] opt-in Replace By Fee (RBF).
-
-Since then, there has been discussion about completely removing the
-first-seen simplification and allowing users to replace any of their
-older unconfirmed transactions with newer transactions, a feature called
-*full-RBF*.  This release includes a `mempoolfullrbf` configuration
-option that allows enabling full-RBF, although it defaults to off
-(allowing only opt-in RBF).
-
-Several alternative node implementations have already enabled full-RBF by
-default for years, and several contributors to Bitcoin Core are
-advocating for enabling full-RBF by default in a future version of
-Bitcoin Core.
-
-As more nodes that participate in relay and mining begin enabling
-full-RBF, replacement of unconfirmed transactions by ones offering higher
-fees may rapidly become more reliable.
-
-Contributors to this project strongly recommend that merchants and services
-not accept unconfirmed transactions as final, and if they insist on doing so,
-to take the appropriate steps to ensure they have some recourse or plan for
-when their assumptions do not hold.
-
-[Bitcoin Core 0.12.0]: https://bitcoincore.org/en/releases/0.12.0/#opt-in-replace-by-fee-transactions
-[bip125]: https://github.com/bitcoin/bips/blob/master/bip-0125.mediawiki
-
-Notable changes
-===============
-
-P2P and network changes
------------------------
-
-- To address a potential denial-of-service, the logic to download headers from peers
-  has been reworked.  This is particularly relevant for nodes starting up for the
-  first time (or for nodes which are starting up after being offline for a long time).
-
-  Whenever headers are received from a peer that have a total chainwork that is either
-  less than the node's `-minimumchainwork` value or is sufficiently below the work at
-  the node's tip, a "presync" phase will begin, in which the node will download the
-  peer's headers and verify the cumulative work on the peer's chain, prior to storing
-  those headers permanently. Once that cumulative work is verified to be sufficiently high,
-  the headers will be redownloaded from that peer and fully validated and stored.
-
-  This may result in initial headers sync taking longer for new nodes starting up for
-  the first time, both because the headers will be downloaded twice, and because the effect
-  of a peer disconnecting during the presync phase (or while the node's best headers chain has less
-  than `-minimumchainwork`), will result in the node needing to use the headers presync mechanism
-  with the next peer as well (downloading the headers twice, again). (#25717)
-
-- With I2P connections, a new, transient address is used for each outbound
-  connection if `-i2pacceptincoming=0`. (#25355)
-
-Updated RPCs
-------------
-
-- The `-deprecatedrpc=softforks` configuration option has been removed.  The
-  RPC `getblockchaininfo` no longer returns the `softforks` field, which was
-  previously deprecated in 23.0. (#23508) Information on soft fork status is
-  now only available via the `getdeploymentinfo` RPC.
-
-- The `deprecatedrpc=exclude_coinbase` configuration option has been removed.
-  The `receivedby` RPCs (`listreceivedbyaddress`, `listreceivedbylabel`,
-  `getreceivedbyaddress` and `getreceivedbylabel`) now always return results
-  accounting for received coins from coinbase outputs, without an option to
-  change that behaviour. Excluding coinbases was previously deprecated in 23.0.
-  (#25171)
-
-- The `deprecatedrpc=fees` configuration option has been removed. The top-level
-  fee fields `fee`, `modifiedfee`, `ancestorfees` and `descendantfees` are no
-  longer returned by RPCs `getmempoolentry`, `getrawmempool(verbose=true)`,
-  `getmempoolancestors(verbose=true)` and `getmempooldescendants(verbose=true)`.
-  The same fee fields can be accessed through the `fees` object in the result.
-  The top-level fee fields were previously deprecated in 23.0. (#25204)
-
-- The `getpeerinfo` RPC has been updated with a new `presynced_headers` field,
-  indicating the progress on the presync phase mentioned in the
-  "P2P and network changes" section above.
-
-Changes to wallet related RPCs can be found in the Wallet section below.
-
-New RPCs
---------
-
-- The `sendall` RPC spends specific UTXOs to one or more recipients
-  without creating change. By default, the `sendall` RPC will spend
-  every UTXO in the wallet. `sendall` is useful to empty wallets or to
-  create a changeless payment from select UTXOs. When creating a payment
-  from a specific amount for which the recipient incurs the transaction
-  fee, continue to use the `subtractfeefromamount` option via the
-  `send`, `sendtoaddress`, or `sendmany` RPCs. (#24118)
-
-- A new `gettxspendingprevout` RPC has been added, which scans the mempool to find
-  transactions spending any of the given outpoints. (#24408)
-
-- The `simulaterawtransaction` RPC iterates over the inputs and outputs of the given
-  transactions, and tallies up the balance change for the given wallet. This can be
-  useful e.g. when verifying that a coin join like transaction doesn't contain unexpected
-  inputs that the wallet will then sign for unintentionally. (#22751)
-
-Updated REST APIs
------------------
-
-- The `/headers/` and `/blockfilterheaders/` endpoints have been updated to use
-  a query parameter instead of path parameter to specify the result count. The
-  count parameter is now optional, and defaults to 5 for both endpoints. The old
-  endpoints are still functional, and have no documented behaviour change.
-
-  For `/headers`, use
-  `GET /rest/headers/<BLOCK-HASH>.<bin|hex|json>?count=<COUNT=5>`
-  instead of
-  `GET /rest/headers/<COUNT>/<BLOCK-HASH>.<bin|hex|json>` (deprecated)
-
-  For `/blockfilterheaders/`, use
-  `GET /rest/blockfilterheaders/<FILTERTYPE>/<BLOCK-HASH>.<bin|hex|json>?count=<COUNT=5>`
-  instead of
-  `GET /rest/blockfilterheaders/<FILTERTYPE>/<COUNT>/<BLOCK-HASH>.<bin|hex|json>` (deprecated)
-
-  (#24098)
-
-Build System
-------------
-
-- Guix builds are now reproducible across architectures (x86_64 & aarch64). (#21194)
-
-New settings
-------------
-
-- A new `mempoolfullrbf` option has been added, which enables the mempool to
-  accept transaction replacement without enforcing BIP125 replaceability
-  signaling. (#25353)
-
-Wallet
-------
-
-- The `-walletrbf` startup option will now default to `true`. The
-  wallet will now default to opt-in RBF on transactions that it creates. (#25610)
-
-- The `replaceable` option for the `createrawtransaction` and
-  `createpsbt` RPCs will now default to `true`. Transactions created
-  with these RPCs will default to having opt-in RBF enabled. (#25610)
-
-- The `wsh()` output descriptor was extended with Miniscript support. You can import Miniscript
-  descriptors for P2WSH in a watchonly wallet to track coins, but you can't spend from them using
-  the Bitcoin Core wallet yet.
-  You can find more about Miniscript on the [reference website](https://bitcoin.sipa.be/miniscript/). (#24148)
-
-- The `tr()` output descriptor now supports multisig scripts through the `multi_a()` and
-  `sortedmulti_a()` functions. (#24043)
-
-- To help prevent fingerprinting transactions created by the Bitcoin Core wallet, change output
-  amounts are now randomized. (#24494)
-
-- The `listtransactions`, `gettransaction`, and `listsinceblock`
-  RPC methods now include a wtxid field (hash of serialized transaction,
-  including witness data) for each transaction. (#24198)
-
-- The `listsinceblock`, `listtransactions` and `gettransaction` output now contain a new
-  `parent_descs` field for every "receive" entry. (#25504)
-
-- A new optional `include_change` parameter was added to the `listsinceblock` command.
+### P2P
 
-- RPC `getreceivedbylabel` now returns an error, "Label not found
-  in wallet" (-4), if the label is not in the address book. (#25122)
+- #26878 I2P network optimizations
+- #26909 net: prevent peers.dat corruptions by only serializing once
 
-Migrating Legacy Wallets to Descriptor Wallets
----------------------------------------------
+### RPC and other APIs
 
-An experimental RPC `migratewallet` has been added to migrate Legacy (non-descriptor) wallets to
-Descriptor wallets. More information about the migration process is available in the
-[documentation](https://github.com/bitcoin/bitcoin/blob/master/doc/managing-wallets.md#migrating-legacy-wallets-to-descriptor-wallets).
+- #26515 rpc: Require NodeStateStats object in getpeerinfo
 
-GUI changes
------------
+### Build System
 
-- A new menu item to restore a wallet from a backup file has been added (gui#471).
+- #26944 depends: fix systemtap download URL
 
-- Configuration changes made in the bitcoin GUI (such as the pruning setting,
-proxy settings, UPNP preferences) are now saved to `<datadir>/settings.json`
-file rather than to the Qt settings backend (windows registry or unix desktop
-config files), so these settings will now apply to bitcoind, instead of being
-ignored. (#15936, gui#602)
+### Wallet
 
-- Also, the interaction between GUI settings and `bitcoin.conf` settings is
-simplified. Settings from `bitcoin.conf` are now displayed normally in the GUI
-settings dialog, instead of in a separate warning message ("Options set in this
-dialog are overridden by the configuration file: -setting=value"). And these
-settings can now be edited because `settings.json` values take precedence over
-`bitcoin.conf` values. (#15936)
+- #26595 wallet: be able to specify a wallet name and passphrase to migratewallet
+- #26675 wallet: For feebump, ignore abandoned descendant spends
+- #26679 wallet: Skip rescanning if wallet is more recent than tip
+- #26761 wallet: fully migrate address book entries for watchonly/solvable wallets
+- #27053 wallet: reuse change dest when re-creating TX with avoidpartialspends
+- #27080 wallet: Zero out wallet master key upon locking so it doesn't persist in memory
 
-Low-level changes
-=================
+### GUI changes
 
-RPC
----
+- gui#687 Load PSBTs using istreambuf_iterator rather than istream_iterator
+- gui#704 Correctly limit overview transaction list
 
-- The `deriveaddresses`, `getdescriptorinfo`, `importdescriptors` and `scantxoutset` commands now
-  accept Miniscript expression within a `wsh()` descriptor. (#24148)
+### Miscellaneous
 
-- The `getaddressinfo`, `decodescript`, `listdescriptors` and `listunspent` commands may now output
-  a Miniscript descriptor inside a `wsh()` where a `wsh(raw())` descriptor was previously returned. (#24148)
+- #26880 ci: replace Intel macOS CI job
+- #26924 refactor: Add missing includes to fix gcc-13 compile error
 
 Credits
 =======
 
 Thanks to everyone who directly contributed to this release:
 
-- /dev/fd0
-- 0xb10c
-- Adam Jonas
-- akankshakashyap
-- Ali Sherief
-- amadeuszpawlik
-- Andreas Kouloumos
 - Andrew Chow
-- Anthony Towns
-- Antoine Poinsot
-- Antoine Riard
-- Aurèle Oulès
-- avirgovi
-- Ayush Sharma
-- Baas
-- Ben Woosley
-- BrokenProgrammer
-- brunoerg
-- brydinh
-- Bushstar
-- Calvin Kim
-- CAnon
-- Carl Dong
-- chinggg
-- Cory Fields
-- Daniel Kraft
-- Daniela Brozzoni
-- darosior
-- Dave Scotese
-- David Bakin
-- dergoegge
-- dhruv
-- Dimitri
-- dontbyte
-- Duncan Dean
-- eugene
-- Eunoia
-- Fabian Jahr
-- furszy
-- Gleb Naumenko
-- glozow
-- Greg Weber
-- Gregory Sanders
-- gruve-p
 - Hennadii Stepanov
-- hiago
-- Igor Bubelov
-- ishaanam
-- Jacob P.
-- Jadi
-- James O'Beirne
-- Janna
-- Jarol Rodriguez
-- Jeremy Rand
-- Jeremy Rubin
-- jessebarton
-- João Barbosa
-- John Newbery
-- Jon Atack
-- Josiah Baker
-- Karl-Johan Alm
-- KevinMusgrave
-- Kiminuo
-- klementtan
-- Kolby Moroz
-- kouloumos
-- Kristaps Kaupe
-- Larry Ruane
-- Luke Dashjr
-- MarcoFalke
-- Marnix
-- Martin Leitner-Ankerl
+- John Moffett
+- Marco Falke
 - Martin Zumsande
-- Michael Dietz
-- Michael Folkson
+- Matthew Zipkin
 - Michael Ford
-- Murch
-- mutatrum
-- muxator
-- Oskar Mendel
-- Pablo Greco
-- pasta
-- Patrick Strateman
-- Pavol Rusnak
-- Peter Bushnell
-- phyBrackets
-- Pieter Wuille
-- practicalswift
-- randymcmillan
-- Robert Spigler
-- Russell Yanofsky
-- S3RK
-- Samer Afach
 - Sebastian Falbesoner
-- Seibart Nedor
-- Shashwat
-- Sjors Provoost
-- Smlep
-- sogoagain
-- Stacie
-- Stéphan Vuylsteke
-- Suhail Saqan
-- Suhas Daftuar
-- t-bast
-- TakeshiMusgrave
 - Vasil Dimov
-- W. J. van der Laan
-- w0xlt
-- whiteh0rse
-- willcl-ark
-- William Casarin
-- Yancy Ribbens
 
 As well as to everyone that helped with translations on
 [Transifex](https://www.transifex.com/bitcoin/bitcoin/).
diff --git a/doc/release-notes/release-notes-24.0.1.md b/doc/release-notes/release-notes-24.0.1.md
new file mode 100644
index 0000000000..24920ba450
--- /dev/null
+++ b/doc/release-notes/release-notes-24.0.1.md
@@ -0,0 +1,391 @@
+24.0.1 Release Notes
+====================
+
+Due to last-minute issues (#26616), 24.0, although tagged, was never fully
+announced or released.
+
+Bitcoin Core version 24.0.1 is now available from:
+
+  <https://bitcoincore.org/bin/bitcoin-core-24.0.1/>
+
+This release includes new features, various bug fixes and performance
+improvements, as well as updated translations.
+
+Please report bugs using the issue tracker at GitHub:
+
+  <https://github.com/bitcoin/bitcoin/issues>
+
+To receive security and update notifications, please subscribe to:
+
+  <https://bitcoincore.org/en/list/announcements/join/>
+
+How to Upgrade
+==============
+
+If you are running an older version, shut it down. Wait until it has completely
+shut down (which might take a few minutes in some cases), then run the
+installer (on Windows) or just copy over `/Applications/Bitcoin-Qt` (on macOS)
+or `bitcoind`/`bitcoin-qt` (on Linux).
+
+Upgrading directly from a version of Bitcoin Core that has reached its EOL is
+possible, but it might take some time if the data directory needs to be migrated. Old
+wallet versions of Bitcoin Core are generally supported.
+
+Compatibility
+==============
+
+Bitcoin Core is supported and extensively tested on operating systems
+using the Linux kernel, macOS 10.15+, and Windows 7 and newer.  Bitcoin
+Core should also work on most other Unix-like systems but is not as
+frequently tested on them.  It is not recommended to use Bitcoin Core on
+unsupported systems.
+
+Notice of new option for transaction replacement policies
+=========================================================
+
+This version of Bitcoin Core adds a new `mempoolfullrbf` configuration
+option which allows users to change the policy their individual node
+will use for relaying and mining unconfirmed transactions.  The option
+defaults to the same policy that was used in previous releases and no
+changes to node policy will occur if everyone uses the default.
+
+Some Bitcoin services today expect that the first version of an
+unconfirmed transaction that they see will be the version of the
+transaction that ultimately gets confirmed---a transaction acceptance
+policy sometimes called "first-seen".
+
+The Bitcoin Protocol does not, and cannot, provide any assurance that
+the first version of an unconfirmed transaction seen by a particular
+node will be the version that gets confirmed.  If there are multiple
+versions of the same unconfirmed transaction available, only the miner
+who includes one of those transactions in a block gets to decide which
+version of the transaction gets confirmed.
+
+Despite this lack of assurance, multiple merchants and services today
+still make this assumption.
+
+There are several benefits to users from removing this *first-seen*
+simplification.  One key benefit, the ability for the sender of a
+transaction to replace it with an alternative version paying higher
+fees, was realized in [Bitcoin Core 0.12.0][] (February 2016) with the
+introduction of [BIP125][] opt-in Replace By Fee (RBF).
+
+Since then, there has been discussion about completely removing the
+first-seen simplification and allowing users to replace any of their
+older unconfirmed transactions with newer transactions, a feature called
+*full-RBF*.  This release includes a `mempoolfullrbf` configuration
+option that allows enabling full-RBF, although it defaults to off
+(allowing only opt-in RBF).
+
+Several alternative node implementations have already enabled full-RBF by
+default for years, and several contributors to Bitcoin Core are
+advocating for enabling full-RBF by default in a future version of
+Bitcoin Core.
+
+As more nodes that participate in relay and mining begin enabling
+full-RBF, replacement of unconfirmed transactions by ones offering higher
+fees may rapidly become more reliable.
+
+Contributors to this project strongly recommend that merchants and services
+not accept unconfirmed transactions as final, and if they insist on doing so,
+to take the appropriate steps to ensure they have some recourse or plan for
+when their assumptions do not hold.
+
+[Bitcoin Core 0.12.0]: https://bitcoincore.org/en/releases/0.12.0/#opt-in-replace-by-fee-transactions
+[bip125]: https://github.com/bitcoin/bips/blob/master/bip-0125.mediawiki
+
+Notable changes
+===============
+
+P2P and network changes
+-----------------------
+
+- To address a potential denial-of-service, the logic to download headers from peers
+  has been reworked.  This is particularly relevant for nodes starting up for the
+  first time (or for nodes which are starting up after being offline for a long time).
+
+  Whenever headers are received from a peer that have a total chainwork that is either
+  less than the node's `-minimumchainwork` value or is sufficiently below the work at
+  the node's tip, a "presync" phase will begin, in which the node will download the
+  peer's headers and verify the cumulative work on the peer's chain, prior to storing
+  those headers permanently. Once that cumulative work is verified to be sufficiently high,
+  the headers will be redownloaded from that peer and fully validated and stored.
+
+  This may result in initial headers sync taking longer for new nodes starting up for
+  the first time, both because the headers will be downloaded twice, and because the effect
+  of a peer disconnecting during the presync phase (or while the node's best headers chain has less
+  than `-minimumchainwork`), will result in the node needing to use the headers presync mechanism
+  with the next peer as well (downloading the headers twice, again). (#25717)
+
+- With I2P connections, a new, transient address is used for each outbound
+  connection if `-i2pacceptincoming=0`. (#25355)
+
+Updated RPCs
+------------
+
+- The `-deprecatedrpc=softforks` configuration option has been removed.  The
+  RPC `getblockchaininfo` no longer returns the `softforks` field, which was
+  previously deprecated in 23.0. (#23508) Information on soft fork status is
+  now only available via the `getdeploymentinfo` RPC.
+
+- The `deprecatedrpc=exclude_coinbase` configuration option has been removed.
+  The `receivedby` RPCs (`listreceivedbyaddress`, `listreceivedbylabel`,
+  `getreceivedbyaddress` and `getreceivedbylabel`) now always return results
+  accounting for received coins from coinbase outputs, without an option to
+  change that behaviour. Excluding coinbases was previously deprecated in 23.0.
+  (#25171)
+
+- The `deprecatedrpc=fees` configuration option has been removed. The top-level
+  fee fields `fee`, `modifiedfee`, `ancestorfees` and `descendantfees` are no
+  longer returned by RPCs `getmempoolentry`, `getrawmempool(verbose=true)`,
+  `getmempoolancestors(verbose=true)` and `getmempooldescendants(verbose=true)`.
+  The same fee fields can be accessed through the `fees` object in the result.
+  The top-level fee fields were previously deprecated in 23.0. (#25204)
+
+- The `getpeerinfo` RPC has been updated with a new `presynced_headers` field,
+  indicating the progress on the presync phase mentioned in the
+  "P2P and network changes" section above.
+
+Changes to wallet related RPCs can be found in the Wallet section below.
+
+New RPCs
+--------
+
+- The `sendall` RPC spends specific UTXOs to one or more recipients
+  without creating change. By default, the `sendall` RPC will spend
+  every UTXO in the wallet. `sendall` is useful to empty wallets or to
+  create a changeless payment from select UTXOs. When creating a payment
+  from a specific amount for which the recipient incurs the transaction
+  fee, continue to use the `subtractfeefromamount` option via the
+  `send`, `sendtoaddress`, or `sendmany` RPCs. (#24118)
+
+- A new `gettxspendingprevout` RPC has been added, which scans the mempool to find
+  transactions spending any of the given outpoints. (#24408)
+
+- The `simulaterawtransaction` RPC iterates over the inputs and outputs of the given
+  transactions, and tallies up the balance change for the given wallet. This can be
+  useful e.g. when verifying that a coin join like transaction doesn't contain unexpected
+  inputs that the wallet will then sign for unintentionally. (#22751)
+
+Updated REST APIs
+-----------------
+
+- The `/headers/` and `/blockfilterheaders/` endpoints have been updated to use
+  a query parameter instead of path parameter to specify the result count. The
+  count parameter is now optional, and defaults to 5 for both endpoints. The old
+  endpoints are still functional, and have no documented behaviour change.
+
+  For `/headers`, use
+  `GET /rest/headers/<BLOCK-HASH>.<bin|hex|json>?count=<COUNT=5>`
+  instead of
+  `GET /rest/headers/<COUNT>/<BLOCK-HASH>.<bin|hex|json>` (deprecated)
+
+  For `/blockfilterheaders/`, use
+  `GET /rest/blockfilterheaders/<FILTERTYPE>/<BLOCK-HASH>.<bin|hex|json>?count=<COUNT=5>`
+  instead of
+  `GET /rest/blockfilterheaders/<FILTERTYPE>/<COUNT>/<BLOCK-HASH>.<bin|hex|json>` (deprecated)
+
+  (#24098)
+
+Build System
+------------
+
+- Guix builds are now reproducible across architectures (x86_64 & aarch64). (#21194)
+
+New settings
+------------
+
+- A new `mempoolfullrbf` option has been added, which enables the mempool to
+  accept transaction replacement without enforcing BIP125 replaceability
+  signaling. (#25353)
+
+Wallet
+------
+
+- The `-walletrbf` startup option will now default to `true`. The
+  wallet will now default to opt-in RBF on transactions that it creates. (#25610)
+
+- The `replaceable` option for the `createrawtransaction` and
+  `createpsbt` RPCs will now default to `true`. Transactions created
+  with these RPCs will default to having opt-in RBF enabled. (#25610)
+
+- The `wsh()` output descriptor was extended with Miniscript support. You can import Miniscript
+  descriptors for P2WSH in a watchonly wallet to track coins, but you can't spend from them using
+  the Bitcoin Core wallet yet.
+  You can find more about Miniscript on the [reference website](https://bitcoin.sipa.be/miniscript/). (#24148)
+
+- The `tr()` output descriptor now supports multisig scripts through the `multi_a()` and
+  `sortedmulti_a()` functions. (#24043)
+
+- To help prevent fingerprinting transactions created by the Bitcoin Core wallet, change output
+  amounts are now randomized. (#24494)
+
+- The `listtransactions`, `gettransaction`, and `listsinceblock`
+  RPC methods now include a wtxid field (hash of serialized transaction,
+  including witness data) for each transaction. (#24198)
+
+- The `listsinceblock`, `listtransactions` and `gettransaction` output now contain a new
+  `parent_descs` field for every "receive" entry. (#25504)
+
+- A new optional `include_change` parameter was added to the `listsinceblock` command.
+
+- RPC `getreceivedbylabel` now returns an error, "Label not found
+  in wallet" (-4), if the label is not in the address book. (#25122)
+
+Migrating Legacy Wallets to Descriptor Wallets
+---------------------------------------------
+
+An experimental RPC `migratewallet` has been added to migrate Legacy (non-descriptor) wallets to
+Descriptor wallets. More information about the migration process is available in the
+[documentation](https://github.com/bitcoin/bitcoin/blob/master/doc/managing-wallets.md#migrating-legacy-wallets-to-descriptor-wallets).
+
+GUI changes
+-----------
+
+- A new menu item to restore a wallet from a backup file has been added (gui#471).
+
+- Configuration changes made in the bitcoin GUI (such as the pruning setting,
+proxy settings, UPNP preferences) are now saved to `<datadir>/settings.json`
+file rather than to the Qt settings backend (windows registry or unix desktop
+config files), so these settings will now apply to bitcoind, instead of being
+ignored. (#15936, gui#602)
+
+- Also, the interaction between GUI settings and `bitcoin.conf` settings is
+simplified. Settings from `bitcoin.conf` are now displayed normally in the GUI
+settings dialog, instead of in a separate warning message ("Options set in this
+dialog are overridden by the configuration file: -setting=value"). And these
+settings can now be edited because `settings.json` values take precedence over
+`bitcoin.conf` values. (#15936)
+
+Low-level changes
+=================
+
+RPC
+---
+
+- The `deriveaddresses`, `getdescriptorinfo`, `importdescriptors` and `scantxoutset` commands now
+  accept Miniscript expression within a `wsh()` descriptor. (#24148)
+
+- The `getaddressinfo`, `decodescript`, `listdescriptors` and `listunspent` commands may now output
+  a Miniscript descriptor inside a `wsh()` where a `wsh(raw())` descriptor was previously returned. (#24148)
+
+Credits
+=======
+
+Thanks to everyone who directly contributed to this release:
+
+- /dev/fd0
+- 0xb10c
+- Adam Jonas
+- akankshakashyap
+- Ali Sherief
+- amadeuszpawlik
+- Andreas Kouloumos
+- Andrew Chow
+- Anthony Towns
+- Antoine Poinsot
+- Antoine Riard
+- Aurèle Oulès
+- avirgovi
+- Ayush Sharma
+- Baas
+- Ben Woosley
+- BrokenProgrammer
+- brunoerg
+- brydinh
+- Bushstar
+- Calvin Kim
+- CAnon
+- Carl Dong
+- chinggg
+- Cory Fields
+- Daniel Kraft
+- Daniela Brozzoni
+- darosior
+- Dave Scotese
+- David Bakin
+- dergoegge
+- dhruv
+- Dimitri
+- dontbyte
+- Duncan Dean
+- eugene
+- Eunoia
+- Fabian Jahr
+- furszy
+- Gleb Naumenko
+- glozow
+- Greg Weber
+- Gregory Sanders
+- gruve-p
+- Hennadii Stepanov
+- hiago
+- Igor Bubelov
+- ishaanam
+- Jacob P.
+- Jadi
+- James O'Beirne
+- Janna
+- Jarol Rodriguez
+- Jeremy Rand
+- Jeremy Rubin
+- jessebarton
+- João Barbosa
+- John Newbery
+- Jon Atack
+- Josiah Baker
+- Karl-Johan Alm
+- KevinMusgrave
+- Kiminuo
+- klementtan
+- Kolby Moroz
+- kouloumos
+- Kristaps Kaupe
+- Larry Ruane
+- Luke Dashjr
+- MarcoFalke
+- Marnix
+- Martin Leitner-Ankerl
+- Martin Zumsande
+- Michael Dietz
+- Michael Folkson
+- Michael Ford
+- Murch
+- mutatrum
+- muxator
+- Oskar Mendel
+- Pablo Greco
+- pasta
+- Patrick Strateman
+- Pavol Rusnak
+- Peter Bushnell
+- phyBrackets
+- Pieter Wuille
+- practicalswift
+- randymcmillan
+- Robert Spigler
+- Russell Yanofsky
+- S3RK
+- Samer Afach
+- Sebastian Falbesoner
+- Seibart Nedor
+- Shashwat
+- Sjors Provoost
+- Smlep
+- sogoagain
+- Stacie
+- Stéphan Vuylsteke
+- Suhail Saqan
+- Suhas Daftuar
+- t-bast
+- TakeshiMusgrave
+- Vasil Dimov
+- W. J. van der Laan
+- w0xlt
+- whiteh0rse
+- willcl-ark
+- William Casarin
+- Yancy Ribbens
+
+As well as to everyone that helped with translations on
+[Transifex](https://www.transifex.com/bitcoin/bitcoin/).