BIP: 340
  Title: Schnorr Signatures for secp256k1
  Author: Pieter Wuille 
          Jonas Nick 
          Tim Ruffing 
  Comments-Summary: No comments yet.
  Comments-URI: https://github.com/bitcoin/bips/wiki/Comments:BIP-0340
  Status: Draft
  Type: Standards Track
  License: BSD-2-Clause
  Created: 2020-01-19
  Post-History: 2018-07-06: https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2018-July/016203.html [bitcoin-dev] Schnorr signatures BIP
== Introduction == === Abstract === This document proposes a standard for 64-byte Schnorr signatures over the elliptic curve ''secp256k1''. === Copyright === This document is licensed under the 2-clause BSD license. === Motivation === Bitcoin has traditionally used [https://en.wikipedia.org/wiki/Elliptic_Curve_Digital_Signature_Algorithm ECDSA] signatures over the [https://www.secg.org/sec2-v2.pdf secp256k1 curve] with [https://en.wikipedia.org/wiki/SHA-2 SHA256] hashes for authenticating transactions. These are [https://www.secg.org/sec1-v2.pdf standardized], but have a number of downsides compared to [http://publikationen.ub.uni-frankfurt.de/opus4/files/4280/schnorr.pdf Schnorr signatures] over the same curve: * '''Provable security''': Schnorr signatures are provably secure. In more detail, they are ''strongly unforgeable under chosen message attack (SUF-CMA)''Informally, this means that without knowledge of the secret key but given valid signatures of arbitrary messages, it is not possible to come up with further valid signatures. [https://www.di.ens.fr/~pointche/Documents/Papers/2000_joc.pdf in the random oracle model assuming the hardness of the elliptic curve discrete logarithm problem (ECDLP)] and [http://www.neven.org/papers/schnorr.pdf in the generic group model assuming variants of preimage and second preimage resistance of the used hash function]A detailed security proof in the random oracle model, which essentially restates [https://www.di.ens.fr/~pointche/Documents/Papers/2000_joc.pdf the original security proof by Pointcheval and Stern] more explicitly, can be found in [https://eprint.iacr.org/2016/191 a paper by Kiltz, Masny and Pan]. All these security proofs assume a variant of Schnorr signatures that use ''(e,s)'' instead of ''(R,s)'' (see Design above). Since we use a unique encoding of ''R'', there is an efficiently computable bijection that maps ''(R,s)'' to ''(e,s)'', which allows to convert a successful SUF-CMA attacker for the ''(e,s)'' variant to a successful SUF-CMA attacker for the ''(R,s)'' variant (and vice-versa). Furthermore, the proofs consider a variant of Schnorr signatures without key prefixing (see Design above), but it can be verified that the proofs are also correct for the variant with key prefixing. As a result, all the aforementioned security proofs apply to the variant of Schnorr signatures proposed in this document.. In contrast, the [https://nbn-resolving.de/urn:nbn:de:hbz:294-60803 best known results for the provable security of ECDSA] rely on stronger assumptions. * '''Non-malleability''': The SUF-CMA security of Schnorr signatures implies that they are non-malleable. On the other hand, ECDSA signatures are inherently malleableIf ''(r,s)'' is a valid ECDSA signature for a given message and key, then ''(r,n-s)'' is also valid for the same message and key. If ECDSA is restricted to only permit one of the two variants (as Bitcoin does through a policy rule on the network), it can be [https://nbn-resolving.de/urn:nbn:de:hbz:294-60803 proven] non-malleable under stronger than usual assumptions.; a third party without access to the secret key can alter an existing valid signature for a given public key and message into another signature that is valid for the same key and message. This issue is discussed in [[bip-0062.mediawiki|BIP62]] and [[bip-0146.mediawiki|BIP146]]. * '''Linearity''': Schnorr signatures provide a simple and efficient method that enables multiple collaborating parties to produce a signature that is valid for the sum of their public keys. This is the building block for various higher-level constructions that improve efficiency and privacy, such as multisignatures and others (see Applications below). For all these advantages, there are virtually no disadvantages, apart from not being standardized. This document seeks to change that. As we propose a new standard, a number of improvements not specific to Schnorr signatures can be made: * '''Signature encoding''': Instead of using [https://en.wikipedia.org/wiki/X.690#DER_encoding DER]-encoding for signatures (which are variable size, and up to 72 bytes), we can use a simple fixed 64-byte format. * '''Public key encoding''': Instead of using ''compressed'' 33-byte encodings of elliptic curve points which are common in Bitcoin today, public keys in this proposal are encoded as 32 bytes. * '''Batch verification''': The specific formulation of ECDSA signatures that is standardized cannot be verified more efficiently in batch compared to individually, unless additional witness data is added. Changing the signature scheme offers an opportunity to address this. * '''Completely specified''': To be safe for usage in consensus systems, the verification algorithm must be completely specified at the byte level. This guarantees that nobody can construct a signature that is valid to some verifiers but not all. This is traditionally not a requirement for digital signature schemes, and the lack of exact specification for the DER parsing of ECDSA signatures has caused problems for Bitcoin [https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-July/009697.html in the past], needing [[bip-0066.mediawiki|BIP66]] to address it. In this document we aim to meet this property by design. For batch verification, which is inherently non-deterministic as the verifier can choose their batches, this property implies that the outcome of verification may only differ from individual verifications with negligible probability, even to an attacker who intentionally tries to make batch- and non-batch verification differ. By reusing the same curve and hash function as Bitcoin uses for ECDSA, we are able to retain existing mechanisms for choosing secret and public keys, and we avoid introducing new assumptions about the security of elliptic curves and hash functions. == Description == We first build up the algebraic formulation of the signature scheme by going through the design choices. Afterwards, we specify the exact encodings and operations. === Design === '''Schnorr signature variant''' Elliptic Curve Schnorr signatures for message ''m'' and public key ''P'' generally involve a point ''R'', integers ''e'' and ''s'' picked by the signer, and the base point ''G'' which satisfy ''e = hash(R || m)'' and ''s⋅G = R + e⋅P''. Two formulations exist, depending on whether the signer reveals ''e'' or ''R'': # Signatures are pairs ''(e, s)'' that satisfy ''e = hash(s⋅G - e⋅P || m)''. This variant avoids minor complexity introduced by the encoding of the point ''R'' in the signature (see paragraphs "Encoding R and public key point P" and "Implicit Y coordinates" further below in this subsection). Moreover, revealing ''e'' instead of ''R'' allows for potentially shorter signatures: Whereas an encoding of ''R'' inherently needs about 32 bytes, the hash ''e'' can be tuned to be shorter than 32 bytes, and [http://www.neven.org/papers/schnorr.pdf a short hash of only 16 bytes suffices to provide SUF-CMA security at the target security level of 128 bits]. However, a major drawback of this optimization is that finding collisions in a short hash function is easy. This complicates the implementation of secure signing protocols in scenarios in which a group of mutually distrusting signers work together to produce a single joint signature (see Applications below). In these scenarios, which are not captured by the SUF-CMA model due its assumption of a single honest signer, a promising attack strategy for malicious co-signers is to find a collision in the hash function in order to obtain a valid signature on a message that an honest co-signer did not intent to sign. # Signatures are pairs ''(R, s)'' that satisfy ''s⋅G = R + hash(R || m)⋅P''. This supports batch verification, as there are no elliptic curve operations inside the hashes. Batch verification enables significant speedups. [[File:bip-0340/speedup-batch.png|center|frame|This graph shows the ratio between the time it takes to verify ''n'' signatures individually and to verify a batch of ''n'' signatures. This ratio goes up logarithmically with the number of signatures, or in other words: the total time to verify ''n'' signatures grows with ''O(n / log n)''.]] Since we would like to avoid the fragility that comes with short hashes, the ''e'' variant does not provide significant advantages. We choose the ''R''-option, which supports batch verification. '''Key prefixing''' Using the verification rule above directly makes Schnorr signatures vulnerable to "related-key attacks" in which a third party can convert a signature ''(R, s)'' for public key ''P'' into a signature ''(R, s + a⋅hash(R || m))'' for public key ''P + a⋅G'' and the same message ''m'', for any given additive tweak ''a'' to the signing key. This would render signatures insecure when keys are generated using [[bip-0032.mediawiki#public-parent-key--public-child-key|BIP32's unhardened derivation]] and other methods that rely on additive tweaks to existing keys such as Taproot. To protect against these attacks, we choose ''key prefixed''A limitation of committing to the public key (rather than to a short hash of it, or not at all) is that it removes the ability for public key recovery or verifying signatures against a short public key hash. These constructions are generally incompatible with batch verification. Schnorr signatures; changing the equation to ''s⋅G = R + hash(R || P || m)⋅P''. [https://eprint.iacr.org/2015/1135.pdf It can be shown] that key prefixing protects against related-key attacks with additive tweaks. In general, key prefixing increases robustness in multi-user settings, e.g., it seems to be a requirement for proving the MuSig multisignature scheme secure (see Applications below). We note that key prefixing is not strictly necessary for transaction signatures as used in Bitcoin currently, because signed transactions indirectly commit to the public keys already, i.e., ''m'' contains a commitment to ''pk''. However, this indirect commitment should not be relied upon because it may change with proposals such as SIGHASH_NOINPUT ([[bip-0118.mediawiki|BIP118]]), and would render the signature scheme unsuitable for other purposes than signing transactions, e.g., [https://bitcoin.org/en/developer-reference#signmessage signing ordinary messages]. '''Encoding R and public key point P''' There exist several possibilities for encoding elliptic curve points: # Encoding the full X and Y coordinates of ''P'' and ''R'', resulting in a 64-byte public key and a 96-byte signature. # Encoding the full X coordinate and one bit of the Y coordinate to determine one of the two possible Y coordinates. This would result in 33-byte public keys and 65-byte signatures. # Encoding only the X coordinate, resulting in 32-byte public keys and 64-byte signatures. Using the first option would be slightly more efficient for verification (around 10%), but we prioritize compactness, and therefore choose option 3. '''Implicit Y coordinates''' In order to support efficient verification and batch verification, the Y coordinate of ''P'' and of ''R'' cannot be ambiguous (every valid X coordinate has two possible Y coordinates). We have a choice between several options for symmetry breaking: # Implicitly choosing the Y coordinate that is in the lower half. # Implicitly choosing the Y coordinate that is evenSince ''p'' is odd, negation modulo ''p'' will map even numbers to odd numbers and the other way around. This means that for a valid X coordinate, one of the corresponding Y coordinates will be even, and the other will be odd.. # Implicitly choosing the Y coordinate that is a quadratic residue (has a square root modulo the field size, or "is a square" for short)A product of two numbers is a square when either both or none of the factors are squares. As ''-1'' is not a square modulo secp256k1's field size ''p'', and the two Y coordinates corresponding to a given X coordinate are each other's negation, this means exactly one of the two must be a square.. In the case of ''R'' the third option is slower at signing time but a bit faster to verify, as it is possible to directly compute whether the Y coordinate is a square when the points are represented in [https://en.wikibooks.org/wiki/Cryptography/Prime_Curve/Jacobian_Coordinates Jacobian coordinates] (a common optimization to avoid modular inverses for elliptic curve operations). The two other options require a possibly expensive conversion to affine coordinates first. This would even be the case if the sign or oddness were explicitly coded (option 2 in the list above). We therefore choose option 3. For ''P'' the speed of signing and verification does not significantly differ between any of the three options because affine coordinates of the point have to be computed anyway. For consistency reasons we choose the same option as for ''R''. The signing algorithm ensures that the signature is valid under the correct public key by negating the secret key if necessary. Implicit Y coordinates are not a reduction in security when expressed as the number of elliptic curve operations an attacker is expected to perform to compute the secret key. An attacker can normalize any given public key to a point whose Y coordinate is a square by negating the point if necessary. This is just a subtraction of field elements and not an elliptic curve operationThis can be formalized by a simple reduction that reduces an attack on Schnorr signatures with implicit Y coordinates to an attack to Schnorr signatures with explicit Y coordinates. The reduction works by reencoding public keys and negating the result of the hash function, which is modeled as random oracle, whenever the challenge public key has an explicit Y coordinate that is not a square. A proof sketch can be found [https://medium.com/blockstream/reducing-bitcoin-transaction-sizes-with-x-only-pubkeys-f86476af05d7 here].. '''Tagged Hashes''' Cryptographic hash functions are used for multiple purposes in the specification below and in Bitcoin in general. To make sure hashes used in one context can't be reinterpreted in another one, hash functions can be tweaked with a context-dependent tag name, in such a way that collisions across contexts can be assumed to be infeasible. Such collisions obviously can not be ruled out completely, but only for schemes using tagging with a unique name. As for other schemes collisions are at least less likely with tagging than without. For example, without tagged hashing a BIP340 signature could also be valid for a signature scheme where the only difference is that the arguments to the hash function are reordered. Worse, if the BIP340 nonce derivation function was copied or independently created, then the nonce could be accidentally reused in the other scheme leaking the secret key. This proposal suggests to include the tag by prefixing the hashed data with ''SHA256(tag) || SHA256(tag)''. Because this is a 64-byte long context-specific constant and the ''SHA256'' block size is also 64 bytes, optimized implementations are possible (identical to SHA256 itself, but with a modified initial state). Using SHA256 of the tag name itself is reasonably simple and efficient for implementations that don't choose to use the optimization. '''Final scheme''' As a result, our final scheme ends up using public key ''pk'' which is the X coordinate of a point ''P'' on the curve whose Y coordinate is a square and signatures ''(r,s)'' where ''r'' is the X coordinate of a point ''R'' whose Y coordinate is a square. The signature satisfies ''s⋅G = R + tagged_hash(r || pk || m)⋅P''. === Specification === The following conventions are used, with constants as defined for [https://www.secg.org/sec2-v2.pdf secp256k1]: * Lowercase variables represent integers or byte arrays. ** The constant ''p'' refers to the field size, ''0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFC2F''. ** The constant ''n'' refers to the curve order, ''0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141''. * Uppercase variables refer to points on the curve with equation ''y2 = x3 + 7'' over the integers modulo ''p''. ** ''is_infinite(P)'' returns whether or not ''P'' is the point at infinity. ** ''x(P)'' and ''y(P)'' are integers in the range ''0..p-1'' and refer to the X and Y coordinates of a point ''P'' (assuming it is not infinity). ** The constant ''G'' refers to the base point, for which ''x(G) = 0x79BE667EF9DCBBAC55A06295CE870B07029BFCDB2DCE28D959F2815B16F81798'' and ''y(G) = 0x483ADA7726A3C4655DA4FBFC0E1108A8FD17B448A68554199C47D08FFB10D4B8''. ** Addition of points refers to the usual [https://en.wikipedia.org/wiki/Elliptic_curve#The_group_law elliptic curve group operation]. ** [https://en.wikipedia.org/wiki/Elliptic_curve_point_multiplication Multiplication (⋅) of an integer and a point] refers to the repeated application of the group operation. * Functions and operations: ** ''||'' refers to byte array concatenation. ** The function ''x[i:j]'', where ''x'' is a byte array, returns a ''(j - i)''-byte array with a copy of the ''i''-th byte (inclusive) to the ''j''-th byte (exclusive) of ''x''. ** The function ''bytes(x)'', where ''x'' is an integer, returns the 32-byte encoding of ''x'', most significant byte first. ** The function ''bytes(P)'', where ''P'' is a point, returns ''bytes(x(P))''. ** The function ''int(x)'', where ''x'' is a 32-byte array, returns the 256-bit unsigned integer whose most significant byte first encoding is ''x''. ** The function ''is_square(x)'', where ''x'' is an integer, returns whether or not ''x'' is a quadratic residue modulo ''p''. Since ''p'' is prime, it is equivalent to the [https://en.wikipedia.org/wiki/Legendre_symbol Legendre symbol] ''(x / p) = x(p-1)/2 mod p'' being equal to ''1''For points ''P'' on the secp256k1 curve it holds that ''y(P)(p-1)/2 ≠ 0 mod p''.. ** The function ''has_square_y(P)'', where ''P'' is a point, is defined as ''not is_infinite(P) and is_square(y(P))''For points ''P'' on the secp256k1 curve it holds that ''has_square_y(P) = not has_square_y(-P)''.. ** The function ''lift_x(x)'', where ''x'' is an integer in range ''0..p-1'', returns the point ''P'' for which ''x(P) = x'' Given a candidate X coordinate ''x'' in the range ''0..p-1'', there exist either exactly two or exactly zero valid Y coordinates. If no valid Y coordinate exists, then ''x'' is not a valid X coordinate either, i.e., no point ''P'' exists for which ''x(P) = x''. The valid Y coordinates for a given candidate ''x'' are the square roots of ''c = x3 + 7 mod p'' and they can be computed as ''y = ±c(p+1)/4 mod p'' (see [https://en.wikipedia.org/wiki/Quadratic_residue#Prime_or_prime_power_modulus Quadratic residue]) if they exist, which can be checked by squaring and comparing with ''c''. and ''has_square_y(P)'' If ''P := lift_x(x)'' does not fail, then ''y := y(P) = c(p+1)/4 mod p'' is square. Proof: If ''lift_x'' does not fail, ''y'' is a square root of ''c'' and therefore the [https://en.wikipedia.org/wiki/Legendre_symbol Legendre symbol] ''(c / p)'' is ''c(p-1)/2 = 1 mod p''. Because the Legendre symbol ''(y / p)'' is ''y(p-1)/2 mod p = c((p+1)/4)((p-1)/2) mod p = 1((p+1)/4) mod p = 1 mod p'', ''y'' is square. , or fails if no such point exists. The function ''lift_x(x)'' is equivalent to the following pseudocode: *** Let ''c = x3 + 7 mod p''. *** Let ''y = c(p+1)/4 mod p''. *** Fail if ''c ≠ y2 mod p''. *** Return the unique point ''P'' such that ''x(P) = x'' and ''y(P) = y'', or fail if no such point exists. ** The function ''point(x)'', where ''x'' is a 32-byte array, returns the point ''P = lift_x(int(x))''. ** The function ''hashtag(x)'' where ''tag'' is a UTF-8 encoded tag name and ''x'' is a byte array returns the 32-byte hash ''SHA256(SHA256(tag) || SHA256(tag) || x)''. ==== Public Key Generation ==== Input: * The secret key ''sk'': a 32-byte array, generated uniformly at random The algorithm ''PubKey(sk)'' is defined as: * Let ''d = int(sk)''. * Fail if ''d = 0'' or ''d ≥ n''. * Return ''bytes(d⋅G)''. Note that we use a very different public key format (32 bytes) than the ones used by existing systems (which typically use elliptic curve points as public keys, or 33-byte or 65-byte encodings of them). A side effect is that ''PubKey(sk) = PubKey(bytes(n - int(sk))'', so every public key has two corresponding secret keys. As an alternative to generating keys randomly, it is also possible and safe to repurpose existing key generation algorithms for ECDSA in a compatible way. The secret keys constructed by such an algorithm can be used as ''sk'' directly. The public keys constructed by such an algorithm (assuming they use the 33-byte compressed encoding) need to be converted by dropping the first byte. Specifically, [[bip-0032.mediawiki|BIP32]] and schemes built on top of it remain usable. ==== Default Signing ==== Input: * The secret key ''sk'': a 32-byte array * The message ''m'': a 32-byte array The algorithm ''Sign(sk, m)'' is defined as: * Let ''d' = int(sk)'' * Fail if ''d' = 0'' or ''d' ≥ n'' * Let ''P = d'⋅G'' * Let ''d = d' '' if ''has_square_y(P)'', otherwise let ''d = n - d' ''. * Let ''rand = hashBIPSchnorrDerive(bytes(d) || m)''. * Let ''k' = int(rand) mod n''Note that in general, taking a uniformly random 256-bit integer modulo the curve order will produce an unacceptably biased result. However, for the secp256k1 curve, the order is sufficiently close to ''2256'' that this bias is not observable (''1 - n / 2256'' is around ''1.27 * 2-128'').. * Fail if ''k' = 0''. * Let ''R = k'⋅G''. * Let ''k = k' '' if ''has_square_y(R)'', otherwise let ''k = n - k' ''. * Let ''e = int(hashBIPSchnorr(bytes(R) || bytes(P) || m)) mod n''. * Return the signature ''bytes(R) || bytes((k + ed) mod n)''. ==== Alternative Signing ==== It should be noted that various alternative signing algorithms can be used to produce equally valid signatures. The algorithm in the previous section is deterministic, i.e., it will always produce the same signature for a given message and secret key. This method does not need a random number generator (RNG) at signing time and is thus trivially robust against failures of RNGs. Alternatively the 32-byte ''rand'' value may be generated in other ways, producing a different but still valid signature (in other words, this is not a ''unique'' signature scheme). '''No matter which method is used to generate the ''rand'' value, the value must be a fresh uniformly random 32-byte string which is not even partially predictable for the attacker.''' '''Synthetic nonces''' For instance when a RNG is available, 32 bytes of RNG output can be appended to the input to ''hashBIPSchnorrDerive''. This will change the corresponding line in the signing algorithm to ''rand = hashBIPSchnorrDerive(bytes(d) || m || get_32_bytes_from_rng())'', where ''get_32_bytes_from_rng()'' is the call to the RNG. It is safe to add the output of a low-entropy RNG. Adding high-entropy RNG output may improve protection against [https://moderncrypto.org/mail-archive/curves/2017/000925.html fault injection attacks and side-channel attacks]. Therefore, '''synthetic nonces are recommended in settings where these attacks are a concern''' - in particular on offline signing devices. '''Nonce exfiltration protection''' It is possible to strengthen the nonce generation algorithm using a second device. In this case, the second device contributes randomness which the actual signer provably incorporates into its nonce. This prevents certain attacks where the signer device is compromised and intentionally tries to leak the secret key through its nonce selection. '''Multisignatures''' This signature scheme is compatible with various types of multisignature and threshold schemes such as [https://eprint.iacr.org/2018/068 MuSig], where a single public key requires holders of multiple secret keys to participate in signing (see Applications below). '''It is important to note that multisignature signing schemes in general are insecure with the ''rand'' generation from the default signing algorithm above (or any other deterministic method).''' ==== Verification ==== Input: * The public key ''pk'': a 32-byte array * The message ''m'': a 32-byte array * A signature ''sig'': a 64-byte array The algorithm ''Verify(pk, m, sig)'' is defined as: * Let ''P = point(pk)''; fail if ''point(pk)'' fails. * Let ''r = int(sig[0:32])''; fail if ''r ≥ p''. * Let ''s = int(sig[32:64])''; fail if ''s ≥ n''. * Let ''e = int(hashBIPSchnorr(bytes(r) || bytes(P) || m)) mod n''. * Let ''R = s⋅G - e⋅P''. * Fail if ''not has_square_y(R)'' or ''x(R) ≠ r''. * Return success iff no failure occurred before reaching this point. For every valid secret key ''sk'' and message ''m'', ''Verify(PubKey(sk),m,Sign(sk,m))'' will succeed. Note that the correctness of verification relies on the fact that ''point(pk)'' always returns a point with a square Y coordinate. A hypothetical verification algorithm that treats points as public keys, and takes the point ''P'' directly as input would fail any time a point with non-square Y is used. While it is possible to correct for this by negating points with non-square Y coordinate before further processing, this would result in a scheme where every (message, signature) pair is valid for two public keys (a type of malleability that exists for ECDSA as well, but we don't wish to retain). We avoid these problems by treating just the X coordinate as public key. ==== Batch Verification ==== Input: * The number ''u'' of signatures * The public keys ''pk1..u'': ''u'' 32-byte arrays * The messages ''m1..u'': ''u'' 32-byte arrays * The signatures ''sig1..u'': ''u'' 64-byte arrays The algorithm ''BatchVerify(pk1..u, m1..u, sig1..u)'' is defined as: * Generate ''u-1'' random integers ''a2...u'' in the range ''1...n-1''. They are generated deterministically using a [https://en.wikipedia.org/wiki/Cryptographically_secure_pseudorandom_number_generator CSPRNG] seeded by a cryptographic hash of all inputs of the algorithm, i.e. ''seed = seed_hash(pk1..pku || m1..mu || sig1..sigu )''. A safe choice is to instantiate ''seed_hash'' with SHA256 and use [https://tools.ietf.org/html/rfc8439 ChaCha20] with key ''seed'' as a CSPRNG to generate 256-bit integers, skipping integers not in the range ''1...n-1''. * For ''i = 1 .. u'': ** Let ''Pi = point(pki)''; fail if ''point(pki)'' fails. ** Let ''ri = int(sigi[0:32])''; fail if ''ri ≥ p''. ** Let ''si = int(sigi[32:64])''; fail if ''si ≥ n''. ** Let ''ei = int(hashBIPSchnorr(bytes(ri) || bytes(Pi) || mi)) mod n''. ** Let ''Ri = lift_x(ri)''; fail if ''lift_x(ri)'' fails. * Fail if ''(s1 + a2s2 + ... + ausu)⋅G ≠ R1 + a2⋅R2 + ... + au⋅Ru + e1⋅P1 + (a2e2)⋅P2 + ... + (aueu)⋅Pu''. * Return success iff no failure occurred before reaching this point. If all individual signatures are valid (i.e., ''Verify'' would return success for them), ''BatchVerify'' will always return success. If at least one signature is invalid, ''BatchVerify'' will return success with at most a negligible probability. === Optimizations === Many techniques are known for optimizing elliptic curve implementations. Several of them apply here, but are out of scope for this document. Two are listed below however, as they are relevant to the design decisions: '''Squareness testing''' The function ''is_square(x)'' is defined as above, but can be computed more efficiently using an [https://en.wikipedia.org/wiki/Jacobi_symbol#Calculating_the_Jacobi_symbol extended GCD algorithm]. '''Jacobian coordinates''' Elliptic Curve operations can be implemented more efficiently by using [https://en.wikibooks.org/wiki/Cryptography/Prime_Curve/Jacobian_Coordinates Jacobian coordinates]. Elliptic Curve operations implemented this way avoid many intermediate modular inverses (which are computationally expensive), and the scheme proposed in this document is in fact designed to not need any inversions at all for verification. When operating on a point ''P'' with Jacobian coordinates ''(x,y,z)'' which is not the point at infinity and for which ''x(P)'' is defined as ''x / z2'' and ''y(P)'' is defined as ''y / z3'': * ''has_square_y(P)'' can be implemented as ''is_square(yz mod p)''. * ''x(P) ≠ r'' can be implemented as ''(0 ≤ r < p) and (x ≠ z2r mod p)''. == Applications == There are several interesting applications beyond simple signatures. While recent academic papers claim that they are also possible with ECDSA, consensus support for Schnorr signature verification would significantly simplify the constructions. === Multisignatures and Threshold Signatures === By means of an interactive scheme such as [https://eprint.iacr.org/2018/068 MuSig], participants can aggregate their public keys into a single public key which they can jointly sign for. This allows ''n''-of-''n'' multisignatures which, from a verifier's perspective, are no different from ordinary signatures, giving improved privacy and efficiency versus ''CHECKMULTISIG'' or other means. Moreover, Schnorr signatures are compatible with [https://web.archive.org/web/20031003232851/http://www.research.ibm.com/security/dkg.ps distributed key generation], which enables interactive threshold signatures schemes, e.g., the schemes described by [http://cacr.uwaterloo.ca/techreports/2001/corr2001-13.ps Stinson and Strobl (2001)] or [https://web.archive.org/web/20060911151529/http://theory.lcs.mit.edu/~stasio/Papers/gjkr03.pdf Genaro, Jarecki and Krawczyk (2003)]. These protocols make it possible to realize ''k''-of-''n'' threshold signatures, which ensure that any subset of size ''k'' of the set of ''n'' signers can sign but no subset of size less than ''k'' can produce a valid Schnorr signature. However, the practicality of the existing schemes is limited: most schemes in the literature have been proven secure only for the case ''k-1 < n/2'', are not secure when used concurrently in multiple sessions, or require a reliable broadcast mechanism to be secure. Further research is necessary to improve this situation. === Adaptor Signatures === [https://download.wpsoftware.net/bitcoin/wizardry/mw-slides/2018-05-18-l2/slides.pdf Adaptor signatures] can be produced by a signer by offsetting his public nonce with a known point ''T = t⋅G'', but not offsetting his secret nonce. A correct signature (or partial signature, as individual signers' contributions to a multisignature are called) on the same message with same nonce will then be equal to the adaptor signature offset by ''t'', meaning that learning ''t'' is equivalent to learning a correct signature. This can be used to enable atomic swaps or even [https://eprint.iacr.org/2018/472 general payment channels] in which the atomicity of disjoint transactions is ensured using the signatures themselves, rather than Bitcoin script support. The resulting transactions will appear to verifiers to be no different from ordinary single-signer transactions, except perhaps for the inclusion of locktime refund logic. Adaptor signatures, beyond the efficiency and privacy benefits of encoding script semantics into constant-sized signatures, have additional benefits over traditional hash-based payment channels. Specifically, the secret values ''t'' may be reblinded between hops, allowing long chains of transactions to be made atomic while even the participants cannot identify which transactions are part of the chain. Also, because the secret values are chosen at signing time, rather than key generation time, existing outputs may be repurposed for different applications without recourse to the blockchain, even multiple times. === Blind Signatures === A blind signature protocol is an interactive protocol that enables a signer to sign a message at the behest of another party without learning any information about the signed message or the signature. Schnorr signatures admit a very [https://www.math.uni-frankfurt.de/~dmst/research/papers/schnorr.blind_sigs_attack.2001.pdf simple blind signature scheme] which is however insecure because it's vulnerable to [https://www.iacr.org/archive/crypto2002/24420288/24420288.pdf Wagner's attack]. A known mitigation is to let the signer abort a signing session with a certain probability, and the resulting scheme can be [https://eprint.iacr.org/2019/877 proven secure under non-standard cryptographic assumptions]. Blind Schnorr signatures could for example be used in [https://github.com/ElementsProject/scriptless-scripts/blob/master/md/partially-blind-swap.md Partially Blind Atomic Swaps], a construction to enable transferring of coins, mediated by an untrusted escrow agent, without connecting the transactors in the public blockchain transaction graph. == Test Vectors and Reference Code == For development and testing purposes, we provide a [[bip-0340/test-vectors.csv|collection of test vectors in CSV format]] and a naive, highly inefficient, and non-constant time [[bip-0340/reference.py|pure Python 3.7 reference implementation of the signing and verification algorithm]]. The reference implementation is for demonstration purposes only and not to be used in production environments. == Footnotes == == Acknowledgements == This document is the result of many discussions around Schnorr based signatures over the years, and had input from Johnson Lau, Greg Maxwell, Andrew Poelstra, Rusty Russell, and Anthony Towns. The authors further wish to thank all those who provided valuable feedback and reviews, including the participants of the [https://github.com/ajtowns/taproot-review structured reviews].